Master classes from plastic bottles. Crafts from plastic bottles - elegant simplicity Large lamp in the garden from a plastic bottle

In this series of articles, we want to help you take a fresh look at the long-familiar, everyday things that surround us, and try to give them a new bright life. Last time we talked about, and today we have an equally romantic object for crafts. Plastic bottles!

1. Containers for cosmetics or toiletries

  1. Find several plastic bottles of different colors and shapes.
  2. Cut off the bottom piece to the desired height.
  3. Finish the edges with a hot iron.
  4. Enjoy!

2. Packing for bulk products

If you buy cereals, pasta and other bulk products by weight, then using the neck of a plastic bottle can greatly facilitate their storage and use.

  1. cut off upper part bottles.
  2. We unscrew the cork and pass the upper part of the bag inside.
  3. We wrap the bag outside and twist the cork.

Now it will be much more convenient for you to measure the right amount of powder, and there will be no way to scatter it throughout the kitchen. More visual instructions can be found in the next video.

3. Container for every little thing with a zipper

  1. Cut off the bottoms of two bottles.
  2. Glue the zipper to the cut line with a glue gun.
  3. Connect the two halves together.

4. Flower pots

Here you can apply so many different solutions and designs that everything depends only on your imagination. We only give a few possible options to stir it (your imagination).

5. Safe transportation of flowers

If you want to give someone a live flower and don't know how to deliver it safe and sound, make a suitable safety cap out of a plastic bottle.

6. Vase for fruit

  1. Cut off the bottom of the bottle.
  2. Gently hold it over the fire in such a way that it changes its shape.
  3. Solder the surface with a soldering iron to form depressions that look like air bubbles.

7. Toy container

Just one ribbon and two strings will turn a plastic bottle into a transparent container for small toys.

8. Thread holder

If you or someone close to you is into knitting, then appreciate this simple device made from plastic bottles that will not allow balls of thread to drive around the room.

We hope you find some of these ideas helpful. And if you have your own experience of the unusual use of used plastic bottles, then share it in the comments.

Helpful Hints

Things made with your own hands are always more valuable and more expensive. We bring to your attention a master class, thanks to which you can learn how to make not only beautiful, but also useful things from plastic bottles.

See also: palm tree from plastic bottles

Bird dispenser from a plastic bottle

You will need:

  • 1 liter plastic bottle.
  • 2 wooden spoons.
  • Screw.
  • Rope.


1. Draw a hole with a radius of 1 cm at a distance of 10 cm from the bottom.

2. Rotate the bottle 90 degrees and draw another hole with a radius of 2 cm, opposite the first one.

3. The same process must be repeated at a distance of 5 cm from the bottom.

4. Then carefully cut out all the drawn holes with a knife.

5. Now you can insert spoons.

6. To hang the bottle, you need to fasten a screw or screw to the bottle cap and hang it on a rope.

7. Finally, you can fill your tank with bird food.

Do-it-yourself seedling dispenser from a plastic bottle

This is a real garden that moisturizes itself, and you need to make a minimum of effort. In addition, crafts of such pots diversify children and fresh parsley, sage, rosemary and thyme are always needed in the kitchen.

You will need:

  • Marker.
  • Durable 1 liter plastic bottles with lids.
  • Scissors.
  • Label remover (e.g. vegetable oil).
  • The soil.
  • Saplings (they can be purchased in the vegetable departments of supermarkets).

1. Mark a line 12 cm from the bottom of the bottle.

2. First, pierce a hole on the marked line with a knife, and then cut the bottle in a circle with scissors.

3. Remove labels with vegetable oil.

4. Insert the top of the bottle with the cap into the bottom base.

5. Fill the top with soil.

6. Fix the seedling by gently pressing it down with soil.

7. Add water to the bottom of the bottle so that the water covers the cap.

8. After that, some water will be absorbed by the soil and you need to add water, following the instructions for a particular plant.

Craft a pencil case from a plastic bottle

Unnecessary plastic bottles can fit into the right and convenient pencil case. The proposed thing can be improved, it all depends on your imagination.

You will need:

  • Empty, washed and dried plastic bottles (in this case 6 pieces).
  • Scissors.
  • Old newspapers.
  • Paint in bolognese.
  • Paperclips.
  • Glue (it is necessary that it glues the plastic well, but does not corrode it).

1. Lay the bottle on its side and carefully insert the knife blade at the base. Cut along the bottom edge.

2. Repeat the procedure with the rest of the bottles.

3. Place all received products on the old newspaper with the bottom up.

4. Spray the paint on the outside of the products in several layers.

5. After the bottles are dry, it's time to line the edges of the cut with felt. The felt strips should be slightly longer than the circumference of the bottle. Glue the material evenly and carefully to each section of the bottle.

6. Wait 15-20 minutes for the glue to dry. It is better not to touch the extra, remaining felt for now.

7. Secure the felt with paper clips for a better bond. Wait another hour and then cut off the rest.

8. Decide where exactly the whole structure will stand, and glue all the bottles together from the side of the felt along the edges with glue. For a good strength of the entire pencil case, do not spare glue.

9. The glue must dry completely. You can fill your pencil case. All is ready!

Crafts from caps from plastic bottles for the garden

Sealed bag

1. Trim the thread on the neck of the bottle.

2. Install plastic bag through the neck and screw on the lid.

This seals the bag, which contributes to the long-term storage of products.

Original curtains from covers

These original curtains as interior doors can decorate a house, cottage or apartment.

Just connect the caps from plastic bottles together with fishing line or thread. At the same time, the curtain pattern can be limited only by your imagination.

DIY paintings from covers

Plastic bottle caps can even work for fine art.

Try to make such a picture, because even children can do it.

You will need:

  • Canvas (any size desired).
  • Plastic bottle caps.
  • Paint (acrylic) and brush.
  • Pencil.
  • Ruler.
  • Glue (not fast drying).
  • Assortment of jewelry, balls, mosaics or buttons.

1. Using a pencil and ruler, mark sections on the canvas.

2. Glue one large plastic cover in the center of each section. Next, you can glue the covers of different sizes and shapes first.

3. Paint the entire canvas with black paint and let dry.

4. Glue an assortment of jewelry in the center of each lid and let dry.

5. Now the sections can be colored as you like.

How to make plastic bottle toys

DIY snake toys

Make funny snakes out of foam by creating a simple device at home!

You will need:

  • Scissors.
  • Plastic water bottles.
  • Old towels.
  • Rubber strip.
  • Small bowl.
  • Dishwashing liquid.

1. Cut off the bottom of the plastic bottle.

2. Secure the towel to the bottom of the bottle with a rubber band.

3. Dip the bottle, towel-side down, into the bowl of soapy water. After that, you can create snakes from tiny bubbles.

Important! Care must be taken to prevent soapy liquid from entering the mouth and eyes.

DIY crocodile toy

You will need:

  • Two half liter plastic bottles.
  • Bottle caps.
  • Scissors.
  • Glue.
  • Thin paper.
  • Tassel.
  • Waxed paper.
  • Eyes (for example, buttons can be used).

1. Using a knife and scissors, cut the bottles in half, then cut one piece so that the height remains 7 cm.


2. Trim the edges of the bottles so that the crocodile is bent.

3. Glue the legs-lids to the crocodile evenly.

4. Make thick balls of paper and attach them like crocodile eyes.

5. Cover the entire body with thin green paper.

6. Cut out waxed paper and glue on paws, eyes and teeth. Paint your teeth in White color and the nostrils and eyes are black.

Instructions: a vase from a plastic bottle

1. For convenience, cut the bottle on the upper contour.

2. Measure and evenly cut strips around the bottle. It is more convenient to do this by cutting wider segments in half.

3. Gently press and fold all strips outwards.

4. Press down on the bottle, placing it upside down on a flat surface. This will help even out the edges.

5. Fold the end of each strip under the next two. Do this so that the tip of each strip is in the place indicated in the photo.

Balls and stones can be added to create a beautiful play of light in the sun. Since the vase will be very light, the weight can contribute to proper balancing.

Warning! Such a vase will be subject to large temperature changes. Therefore, do not leave it near heating units in order to prevent thin strips from spreading.

Large lamp in the garden from a plastic bottle

The bottle is used as a light source. Such an invention is capable of making a lamp with a large illuminated space from a small lantern.

Alternatively, you can use a bleach solution in a bottle for the best light diffusion.

Universal spoon from a plastic bottle

Here is such a simple, but at the same time, sometimes very necessary spoon (for example, at a picnic) can be cut out of an empty plastic bottle.

Making food containers from plastic bottles

The idea is to use two plastic bottles to make a storage container for food like beans, rice, noodles and sugar.

Just cut out bottles of different sizes: the long one will be the base, and the short one will be the lid. Choose a size so that the lid closes easily and at the same time tightly.

Watering from plastic bottles

If you have a large garden, but do not have time for watering and do not want to spend money on newfangled expensive structures, then we present a simple idea sprinkler.

When a person has free time and fantasy - any unnecessary thing will turn into a work of art. Many "skillful hands" use plastic bottle crafts as elements, as well as in the form of furniture. From colored bottle caps, mosaic panels are obtained, which cover the surfaces of walls, paths, fences.

Range creative possibilities so wide that you often don't know where to start. We will help you understand what is suitable specifically for your case and what crafts to decorate the empty space with.

Application of plastic bottles

After several attempts to make a souvenir from a plastic bottle with your own hands, your hobby will grow into a full-fledged hobby for one evening. It's so easy and affordable! There are practical and decorative uses for products made from plastic bottles.

Practical- This:

  • storage containers,
  • feeders,
  • coasters,
  • plant containers,
  • furniture

and even carports, greenhouses, washbasins, outdoor showers, etc.

Crafts from plastic bottles - this and homemade furniture. In appearance, a rather complex design is mastered quite simply. The only condition is that there should be many bottles of the same type. Handmade armchairs, sofas and ottomans are not inferior in terms of comfort to classic factory furniture.

How to make an ottoman from plastic bottles: a master class

In decorative terms crafts from plastic bottles have a wider range

  • figures from plastic bottles;
  • lamps;
  • flowers
  • garlands, etc.

They have one important advantage - the availability of the material. At the same time, products made from PET bottles are highly reliable if the parts are correctly connected.

Often made from plastic bottles vases, pots and flowers.

In addition, using plastic containers, you can originally decorate the room by making artificial bouquet. Roses, tulips or daisies are placed in a handmade vase. If desired, the composition is decorated with LED lighting. Thus, an impromptu flower will turn into an unusual night light.

What can be made from plastic bottles for the yard

There is always an empty lot in the country. Building a gazebo or an extension is long and difficult, but the “bare” uncluttered territory “cuts” the eye. Crafts from plastic bottles for the street will help decorate the courtyard. Using plastic bottles, caps and a frame, make beautiful tables with chairs. It will be easy to surprise guests with such garden furniture during a festive feast in nature.

In products from plastic bottles are included and bird feeders which will not only decorate country cottage area, but also help birds survive in the winter.

Ideas from plastic bottles: lamp caps

From caps and cut necks, with the help of simple manipulations, original lamps that will decorate both the interior of the house and the yard. Unusual lamps are harmoniously complemented by plastic compositions designed in the form of exotic plants.

Learn to collect simple plastic bottle crafts possible within 2-3 hours. Go for it!

Crafts from 5 liter plastic bottles

A bulky-looking container is also applicable for decorating an interior or yard. Large plastic bottles are often used to make pet figurines(pigs, bulls, dogs, etc.). Crafts from 5 liter PET bottles - a common decoration for summer cottages, flower beds and a playground. Therefore, there are many ideas with their use, and the most striking examples of plastic bottle products are collected on our website. simple but tasteful.

Application of 5 liter plastic bottles: master class

Many people who are fond of fishing, hunting and other extreme views sports and recreation, faced with the problem of damp matches (when you urgently need to make a fire) or paper banknotes that got wet and came into disrepair because of this. I propose to solve this problem by making, from plastic bottles, a sealed container for storing things that do not tolerate dampness and moisture.

In order to make, with our own hands, an airtight container for storing small things that are afraid of dampness and moisture, we need the following things - two plastic bottles with corks (the size of the bottles does not matter). Of the tools needed for making homemade, you will need a construction or clerical knife, an adhesive gun and sandpaper (zero).


When the source material and the required tools are collected, we proceed to the "manufacturing". To begin with, with a construction knife, we cut off the necks from both bottles - only that part of them where the thread is located and the cork is twisted.




When this operation is done, we clean, with sandpaper, the places of cuts on the necks so that there are no burrs left on them (they will interfere with further gluing of parts).


The burrs on the cuts have been removed - we proceed to gluing the resulting parts. To do this, apply, with a glue gun, plastic glue to the cleaned cut, in a circle, of the neck of the bottle and, without waiting for it to cool, apply and press the cut of the second neck to it. Having pressed the parts with cuts to each other, we hold them in this way for about a minute so that the glue cools down.


To keep the parts stronger and the glue line does not leak, we glue it again in a circle from the outside.


We give the glue time to cool and everything, the sealed container is ready for use.
mob_info