Drill training all around. Plan notes for the discipline "" on the topic: Drill techniques with weapons

I APPROVED

PLAN - SUMMARY

Conducting drill training classes with l/s

Subject: Drill techniques and movements without weapons.

Target: Improving methodological skills in conducting training and drill classes.

Study questions:

Organization and methodology of conducting classes on performing drill techniques and moving without weapons:

- combat stand

- turns on the spot and in motion

- marching at a marching pace

Time: 45 min

Place: Parade ground

Method: story, show, training

Literature: Drill manual chapter 2. A manual for training young soldiers.

PROGRESS OF THE CLASS:

Introductory part.

5 minutes.

I accept the report on the group’s readiness to conduct the lesson. I check the presence of l/s, appearance. I announce the topic and educational issues.

Main part .

Drill stand

35 min.

7 min.

The combat stance is the starting position for the correct and beautiful execution of all combat techniques.

The commander shows by personal example how to correctly adopt a combat stance, briefly explaining the implementation of each of its elements. Explains by what commands and when a combat stance is taken.

The l/s must see the commander's display from the front, side, and behind.

The combat stance is taken upon the command “ BECOME" or " SMYRNO". At this command, stand straight, without tension, put your heels together, align your toes along the front line, placing them at the width of your feet; straighten your knees, but do not strain them; raise your chest and move your whole body forward slightly; pick up the belly; turn your shoulders; lower your arms so that your hands, palms facing inward, are on the sides and in the middle of your thighs, and your fingers are bent and touching your thighs; keep your head high and straight, without sticking out your chin; look straight ahead; be ready for immediate action.
The formation stance on the spot is also accepted without a command: when giving and receiving an order, during a report, during the performance of the National Anthem Russian Federation, when performing a military greeting, as well as when giving commands.

By command "FREE" stand freely, loosen your right or left leg at the knee, but do not move from your place, do not lose your attention and do not talk.

I order the soldiers to take a drill position on their own and check each of them, noting any shortcomings.

I coach in performing the technique and make comments to those who make mistakes.

Turns in place

10 min.

Turns on the spot are performed according to the commands: “On the right-VO”, “On the le-VO”, “Kru-GOM”.

The commander lines up the squad in one line with an interval of two steps and generally indicates a turn to the right. After this, he shows turns at a slow pace with an accompanying explanation of the technique and procedure for preliminary and executive commands. Right turns are learned in divisions into two counts: on the first count you need to sharply turn towards your right hand on your right heel and left toe, maintaining the correct position of the body, and, without bending your knees, transfer the weight of your body to the front leg, on the second count put the other foot in the shortest way. Having demonstrated the technique for divisions, the squad leader commands: “To the right, according to divisions, do – ONCE, do – TWO.” In case of incorrect or unclear execution of the count "ONE", "TWO" the command is given "RESIGN". After learning how to turn right in sections, the commander begins to perform it as a whole, for which, when giving a command, he accompanies it by counting out loud - “ONE, TWO.” When performing a turn in general, it is necessary to draw the attention of trainees to ensure that it is performed not only with the help of the legs, but also with a sharp movement of the body in the direction of the turn, with further observance of all the rules of the combat stance.

Having completed the training in making a right turn, the squad leader tells and shows in general and by division how to make a left turn. Turning left is done in the same way.

Turn around on command "Kru-GOM" the same as a turn to the left, with the only difference being that the turn is made 180° (full) with a sharp turn of the body in a circle. The squad leader shows the technique as a whole, and then in divisions into two counts. When turning around, the squad leader carefully ensures that the soldier does not prematurely lift the leg behind him from his place, and when turning does not allow the body to sway or swing his arms.

Learning to turn right, left, and around continues independently, in pairs, and as part of a squad until complete mastery and correct execution.

Movement in marching steps

8 min.

The walking movement is carried out at a pace of 110-120 steps per minute. Step size -70-80 cm.

Movement in marching steps begins on command "Formation step - MARCH"(in move "Combatant-MARCH"), and move at a walking pace on command "Step-MARCH".

At a preliminary command, move the body forward a little, transfer its weight more to the right leg, maintaining stability; on the executive command, start moving with the left foot in full step.

When moving in a marching step, bring your leg with the toe pulled forward to a height of 15-20 cm from the ground and place it firmly on the entire foot.

Using your hands, starting from the shoulder, make movements near the body: forward– bending them at the elbows so that the hands rise above the belt buckle to the width of a palm from the body, and the elbow is at the level of the hand; back– to failure in the shoulder joint. Fingers are bent, keep your head straight, look ahead.

Turns in motion

10 min.

Turns in motion are performed according to the commands: “Direct-VO”, “Nale-VO”, “All around MARCH”.

To turn right (left) while moving, the executive command is given simultaneously with placing the right (left) foot on the ground. At this command, take a step with your left (right) foot, turn on the toe of your left (right) foot, simultaneously with the turn, move your right (left) foot forward and continue moving in a new direction.

To turn around in motion, the executive command is given simultaneously with placing the right foot on the ground. At this command, take another step with your left foot (a count of one), move your right foot half a step forward and slightly to the left and, sharply turning towards your left hand on the toes of both feet (a count of two), continue moving with your left foot in a new direction (in a count of three).

When turning, the movement of the arms is made in time with the step.

Final part

5 minutes.

Let me summarize the lesson briefly;

I point out errors and ways to eliminate them;

I answer questions from trainees;

I celebrate the most distinguished students in the lesson;

I give you a task for self-study.

Combat stand (Fig. 60). The combat stance is taken upon the command “STAND”.

At this command, quickly get into formation and stand straight, without tension, put your heels together, and turn your toes along the front line to the width of your feet; straighten your knees, but do not strain them; raise your chest and move your whole body forward slightly; pick up the belly; turn your shoulders; lower your arms so that your hands, palms facing inward, are on the sides and in the middle of your thighs, and your fingers are bent and touching your thighs; keep your head high and straight, without sticking out your chin; look straight ahead; be ready for immediate action.

On the spot, at the command “Attention”, quickly take a combat stance and do not move.

The “at attention” position on the spot is also accepted without a command: during the performance of the National Anthem of the Republic of Belarus, when giving and receiving orders, when reporting and addressing military personnel to each other, during a military salute, as well as when issuing commands.

At the command “FREE”, stand freely, loosen your right or left leg at the knee, but do not move from your place, do not lose your attention, and do not talk.

At the command “REFUEL”, without leaving your place in the ranks, adjust your weapons, uniforms and equipment; if necessary, to be out of commission, contact your immediate superior for permission; talking and smoking only with the permission of the senior commander. Before the command “REFUEL” the command “FREE” is given.

To remove hats, the command “Hats (headdress) REMOVE” is given, and to put them on, “Hats (headdress) WEAR.” If necessary, single military personnel remove and put on their headgear without command. The removed headdress is held in the left freely lowered hand with the star (cockade) forward.

Turns in place. Turns on the spot are performed using the commands: “Right-WAY”, “Half-turn right-WAY”. “Nale-VO”, “Half-turn nale-VO”. “Kru-GOM.”

Turns around (1/2 circle), left (1/4 circle), half a turn to the left (1/8 circle) are performed towards the left hand on the left heel and on the right toe; to the right and half a turn to the right - towards the right hand on the right heel and on the left toe.

Turns are performed in two counts: on the first count, turn around, maintaining the correct position of the body, and, without bending your knees, transfer the weight of the body to the front leg; on the second count, put the other leg in the shortest way.

Movement. The movement is performed by walking or running. The normal speed of movement is 110-120 steps per minute. The step size is 70-80 cm. The normal running speed is 165-180 steps per minute. The step size is 85-90 cm.

The step can be combat or marching.

The formation step (Fig. 61) is used when units pass through a solemn march; during a military greeting by them on the move; when a serviceman approaches his superior and when leaving him; upon failure and return to service, as well as during combat training.

The walking step is used in all other cases.

Movement in a marching step begins with the command “Formation step - MARCH” (in the movement “Formation step - MARCH”), and movement in a marching step begins with the command “Step - MARCH”. Upon a preliminary command, move the body slightly forward, shift its weight more to the right leg, maintaining stability; on the executive command, start moving with the left foot in full step.

When moving in a marching step, take the leg with the toe pulled forward to a height of 15-20 cm from the ground and place it firmly on the entire foot, at the same time separating the other leg from the ground. With your hands, starting from the shoulder, perform movements near the body: forward - bending them at the elbows so that the hands rise above the belt buckle to the width of the palm and at a distance of the palm from the body; back - to failure in the shoulder joint. The fingers are half bent. While moving, keep your head and body straight and look ahead.

When moving at a walking pace, move your leg freely, without pulling your toes, and place it on the ground, as during normal walking; perform free movements around the body with your hands.

When moving at a marching pace, on the command “Attention”, switch to a marching step. When moving at a marching pace, on the command “FREE”, walk at a marching pace.

With the command “REFUEL,” you are allowed to adjust your weapon, uniform and equipment; if necessary, contact your immediate superior. Leaving the ranks and talking is only with the permission of the commander.

The running movement begins with the command “Run - MARCH” ». When moving from a place, upon a preliminary command, move the body slightly forward, bend the arms halfway, moving the elbows slightly back; on the executive command, start running with your left leg, perform free movements with your arms forward and back in time with the running.

Step (run) in place (Fig. 62) is carried out using the command “In place, step (run) - MARCH.” According to this command, a step should be indicated by raising and lowering the legs, while the leg is raised 15-20 cm from the ground and placed on the ground from the front of the foot along the entire footprint (when running - on the front); make movements with the hands in time with the step.

At the command “STRAIGHT”, given simultaneously with placing your left foot on the ground, take another step in place with your right foot and begin moving with your left foot in a full step (running).

A command is given to stop the movement. For example: “Private Petrov - STOP.”

At the executive command, given simultaneously with placing the right or left foot on the ground, take another step and, placing the foot, take the “at attention” position.

To change the speed of movement, the following commands are given: “WIDER STEP”, “SHORTER STEP”, “FREQUENT STEP”. “Re-JE.”

“HALF STEP”, “FULL STEP”.

To move single military personnel a few steps to the side, a command is given, for example: “Private Petrov, two steps to the right (left), step by step - MARCH." At this command, the soldier takes two steps to the right (left), placing his foot after each step.

To move forward or backward several steps, a command is given, for example, “Two steps forward (backward), one step at a time - MARCH." At this command, take two steps forward (back) and put your foot down.

When moving to the right, left and back, there is no movement of the arms.

Turns while moving. Turns in motion at a step are performed according to the commands: “Direct-VO”. “Half-turn to the right-VO”, “Nale-VO”, “Half-turn to the-right-VO”, “All around - MARCH”.

To turn right and half-turn to the right, the executive command is given simultaneously with placing the right foot on the ground. At this command, take a step with your left foot, turn on the toe of your left foot, simultaneously with the turn, bring your right foot forward and continue moving in a new direction.

To turn left and half a turn to the left, the executive command is given simultaneously with placing the left foot on the ground. At this command, take a step with your right foot, turn on the toe of your right foot, simultaneously with the turn, bring your left foot forward and continue moving in a new direction.

To turn in a circle, the executive command is given simultaneously with placing the right foot on the ground. At this command, take another step with your left foot (a count of one), move your right foot half a step forward and slightly to the left and, sharply turning towards your left hand on the toes of both feet (a count of two), continue moving with your left foot in a new direction (on a count of three).

When turning, the movement of the arms is performed in time with the step.

Turns and half-turns to the right and left when running are performed according to the same commands as when moving at a walk, turning in one place for two counts to the beat of running. A turn in a circle while running occurs towards the left hand in one place for four counts to the beat of running.

1. Tell and show how the drill is performed. 2. Tell us about the actions of military personnel following the commands “Attention”, “At ease”, “Refuel”. 3. Perform turns on the spot and in motion, demonstrate the movement with a marching step.

Pre-conscription training: textbook for 10-11th grades. public institutions avg. education with Russian language training / V. B. Varlamov. - 3rd ed., revision. and additional - Minsk: Adukatsiya i vyhavanne, 2012. - 328 p. : ill.

The drill stance is the main element of drill training

The combat stance (Fig. 13) is taken upon the command “Stand!” or “Attention!” At this command, stand straight, without tension, put your heels together, align your toes along the front line, placing them at the width of your feet; straighten your knees, but do not strain them; raise your chest and move your whole body forward a little; pick up the belly; turn your shoulders; lower your arms so that your hands, palms facing inward, are on the sides and in the middle of your thighs, and your fingers are bent and touching your thighs; keep your head high and straight, without sticking out your chin; look straight ahead; be ready for immediate action.

The formation stance on the spot is also accepted without a command: when giving and receiving an order, when making a report, during the performance of the National Anthem of the Russian Federation, when performing a military salute, and also when giving commands.

At the command “At ease!” stand freely, loosen your right or left leg at the knee, but do not move from your place, do not lose your attention and do not talk.

At the command “Refuel!”, without leaving your place in the ranks, adjust your weapons, uniforms and equipment; If necessary, go out of commission and seek permission to contact your immediate superior.

Before the command “Get fuel!” The command “At ease!” is given.

To remove hats, the command “Hats (headdress) - take off!” is given, and to put them on - “Headdresses (headdress) - put on!”. If necessary, single military personnel remove and put on their headgear without command.

The removed headdress is held in the left freely lowered hand with the star (cockade) forward.

Without a weapon or with a weapon in the “behind the back” position, the headdress is removed and put on with the right hand, and with the weapon in the “on the belt”, “on the chest” and “at the leg” positions - with the left. When removing a headgear with a carabiner in the “shoulder” position, the carabiner is first taken to the leg.

Turns on the spot are performed according to the commands “Right-VO!”, “Nale* VO!”, “Run-GO!”.

Turns around and to the left are made towards the left hand, on the left heel and right toe; turns to the right - towards the right hand, on the right heel and left toe.

Turns are performed in two steps: the first step is to turn, maintaining the correct position of the body, and, without bending your knees, transfer the weight of the body to the front leg; The second technique is to put the other leg in the shortest way.

The movement is performed by walking or running.

The walking movement is carried out at a pace of 110-120 steps per minute. Step size - 70-80 cm.

The running movement is carried out at a pace of 165-180 steps per minute. Step size - 85-90 cm.

The step can be combat or marching.

The drill step is used when units are passing through a ceremonial march, when they perform a military salute on the move, when a serviceman approaches his superior and when leaving him, when leaving the ranks and returning to ranks, as well as during drill training classes.

The walking step is used in all other cases.

Movement in a formation step begins with the command “Formation step - march!” (in motion - “For the combatants - march!”), and movement at a marching pace - on the command “Step - march!”.

Upon a preliminary command, move the body forward slightly, transfer its weight to the right leg, maintaining stability; on the executive command, start moving with the left foot in full step.

The team is divided into preliminary and executive; teams can only be executive. For example: “Platoon - STOP!”; “Platoon” is preliminary, and “STOP!” - executive team.

When moving in a marching step, bring the leg with the toe pulled forward to a height of 15-20 cm from the ground and place it firmly on the entire foot (Fig. 15, a). With your hands, starting from the shoulder, make movements near the body: forward - bending them at the elbows so that the hands rise above the belt buckle to the width of the palm and at a distance of the palm from the body, and the elbow is at the level of the hand; back - to failure in the shoulder joint. Fingers are bent, keep your head straight, look ahead.

When moving at a walking pace, move your leg freely, without pulling your toes, and place it on the ground, as during normal walking, with your hands making free movements near the body.

When moving at a walking pace on the command “Attention!” go to a combat step. When moving in a formation step on the command “At ease!” walk at a walking pace.

The running movement begins with the command “Run - march!”.

To move from a step to a run, following a preliminary command, you need to bend your arms halfway, moving your elbows slightly back. The executive command is given simultaneously with placing the left foot on the ground. At this command, take a step with your right foot and start running with your left foot.

To switch from running to walking, the command “Step - march!” is given. The executive command is given simultaneously with placing the right foot on the ground. At this command, take two more steps while running and start walking with your left foot.

A step on the spot is performed by the command “Step on the spot - march!” (in motion - “On the spot!”).

According to this command, a step is indicated by raising and lowering the legs, while raising the leg 15-20 cm from the ground and placing it on the entire foot, starting from the toe; make movements with your hands in time with your step. At the command “Straight!”, given simultaneously with placing your left foot on the ground, take another step with your right foot in place and begin moving with your left foot in a full step. In this case, the first three steps must be combat.

To stop the movement, a command is given, for example: “Private Petrov - stop!”

At the executive command given simultaneously with placing the right or left foot on the ground, take another step and, placing the foot, take a combat stance.

To change the speed of movement, the commands “Wider step!”, “Shorter step!”, “More often step!”, “Slower step!”, “Half a step!”, “Full step!” are given.

Turns in motion are performed according to the commands “Head-WAY!”, “Next-WO!”, “All around - march!”.

To turn right (left), the executive command is given simultaneously with placing the right (left) foot on the ground. At this command, take a step with your left (right) foot, turn on the toe of your left (right) foot, simultaneously with the turn, move your right (left) foot forward and continue moving in a new direction.

To turn in a circle, the executive command is given simultaneously with placing the right foot on the ground. At this command, take another step with your left foot (on the count of “one”), move your right foot half a step forward and slightly to the left and, sharply turning towards your left hand on the toes of both feet (on the count of “two”), continue moving with your left legs in a new direction (on the count of “three”).

When turning, the movement of the arms is made in time with the step.

conclusions
1) The combat stance is taken upon the command “Stand!” or “Attention!”
2) The formation stance by military personnel on the spot is also accepted without a command, including when giving and receiving an order, during a report, during the performance of the National Anthem of the Russian Federation, when performing a military salute, as well as when giving commands.
3) The drill step is used when units are passing through a ceremonial march, when they perform a military salute on the move, when a serviceman approaches and departs from his superior, when leaving the ranks and returning to ranks, as well as during drill training classes.
4) Military personnel use the walking step in all other cases.

Movement in marching steps, turns in motion. Commands given when making turns

Movement in marching steps

The marching step is used when units pass through a solemn march; when they perform a military salute on the move; when a serviceman approaches his superior and when leaving him; upon failure and return to service, as well as during drill training.

Movement in marching steps is carried out at a pace of -100-120 steps per minute. Step size - 70 - 80 cm.

Movement in marching steps

Movement in a formation step begins with the command “Formation step - MARCH” (in the movement “Formation step - MARCH”).

At a preliminary command, move the body forward a little, transfer its weight more to the right leg, maintaining stability; on the executive command, start moving with the left foot in full step.

When moving in a marching step, bring your leg with the toe pulled forward to a height of 15-20 cm from the ground and place it firmly on the entire foot.

With your hands, starting from the shoulder, make movements near the body: forward - bending them at the elbows so that the hands rise above the belt buckle to the width of the palm and at a distance of the palm from the body, and the elbow is at the level of the hand; back - to failure in the shoulder joint.

Fingers are bent, keep your head straight, look ahead.

When moving at a marching pace, on the command “Attention”, switch to a marching step. When moving at a marching pace, on the command “FREE”, walk at a marching pace. When indicating a step in place, upon the command “STRAIGHT”, given simultaneously with placing the left foot on the ground, take another step in place with the right foot and begin moving with the left foot in a full step. In this case, the first three steps must be combat.

The sequence of learning to move in marching steps:

Hand movement training;

Training in marking a step on the spot;

Training in movement in marching steps in four counts;

Training in movement with a marching step on two counts;

Training in movement at a marching pace at a slow pace (at a speed of 50-60 steps per minute);

Training in movement at a drill pace at a set pace according to the markings of the construction site;

General training in marching along the parade ground without markings;
- acceptance of tests.

Methodology for learning a drill technique

Having talked about the use of the drill step, the commander begins to learn it with the squad. Learning to move with a marching step, like every new technique, should begin with an exemplary demonstration and explanation.

Arm movement training

Step in place

Movement in a formation step in four counts: a - position before the start of movement; b - beginning of movement (first step); c - position at the end of the first step

Preparatory exercise - hand movement

To perform the preparatory exercise - moving your arms, the command is given: “Move your arms, do it - ONCE, do it - TWO.”

According to the count “do - ONCE” bend right hand at the elbow, moving it from the shoulder near the body so that the hand rises palm-width above the belt buckle and is at a palm-distance from the body; simultaneously left hand pull back until the shoulder joint fails. The fingers should be bent and the elbow of the right hand should be slightly raised.

According to the “do - TWO” count, move your left hand forward, and your right, starting from the shoulder, back to failure.

After each count, the commander delays the position of the students’ hands and corrects the mistakes they made.

Preparatory exercise for arms with a step in place

To perform a preparatory exercise for the arms with a step in place, the commands are given: “In place, with a step - MARCH,” and then - “Movement with the arms with a step in place, ONE, TWO.”

In the count “ONE”, take a step in place with your left foot, lifting it with the knee bent 15-20 cm from the ground and lowering it to the ground, across the entire foot, starting from the toe. Bend your right arm at the elbow, moving it from the shoulder near the body so that the hand rises a palm's width above the belt buckle and is at a palm's distance from the body; At the same time, move your left arm back until the shoulder joint goes to failure. The fingers should be bent and the elbow of the right hand should be slightly raised
In the count “TWO”, similarly, take a step in place with your right foot.

Preparatory exercise - marching in marching steps in four-count divisions

To perform the preparatory exercise - moving in a formation step in four-count divisions, the command is given: “Formation step, in four-count divisions, step - MARCH.” After the command “March,” the count is made: “ONE, two, three, four. ONE, two, three, four” and so on. The count “ONE” is pronounced loudly.

At the preliminary command “Step”, move the body slightly forward, transferring the weight of the body more to the right leg and maintaining stability.

On the executive command “March” and on the count “ONE”, start moving with the left foot, in a full step, bringing the leg forward with the toe pulled out.

The foot should be parallel to the ground and raised to a height of 15-20 cm. The foot is placed firmly on the ground with the entire foot, at the same time lifting the right leg off the ground and pulling it half a step forward to the heel of the left foot. Simultaneously with the step, move your right hand forward, bend it at the elbow, moving it from the shoulder near the body so that the hand rises a palm's width above the belt buckle and is at a palm's distance from the body; At the same time, move your left arm back until the shoulder joint goes to failure. The fingers should be bent and the elbow of the right hand should be slightly raised. Then stand on your left leg with your arms down, your right leg straight, with your toe almost at the ground.

On the count of “two, three, four”, make a pause, eliminating the mistakes made at this time.

On the next count of “ONE”, repeat the movement with the right foot, and on the count of “two, three, four”, hold again, etc.

Preparatory exercise - movement in marching steps in two-count divisions

To perform a preparatory exercise - moving in a formation step in divisions into two counts, the command is given: “In formation, in divisions into two counts, in a step - MARCH” and the count is made: “one, two; one, two,” etc.

Counting “one”, step forward with your left foot with the movement of your arms and stop on your left leg with your hands lowered at your hips.

On the count of “two”, take a short pause to eliminate any comments.

On the next count of “ones”, take a full step with your right foot, as well as your left, stopping on it with your hands lowered at your hips. If mistakes are made during the preparatory exercise for divisions into two counts, you should repeat the exercise again into four counts.

Training in marching movements in general

The training begins with learning to move at a marching pace in general at a pace of 50-60 steps per minute, followed by increasing the pace of movement to 110-120 steps per minute. To correct mistakes, it is recommended to move from the full tempo of movement in a marching step to movement in divisions of four or two counts.

Then you should move on to training movement in formation steps in the formation of a squad (platoon).

At the end of training in marching, the commander accepts credit from each student.

Typical mistakes when moving in formation:

The body is laid back;

There is no coordination in the movement of arms and legs;

The head is lowered;

Movement of the arms near the body is done not from the shoulder, but by bending the elbows;

Lifting the leg from the ground is significantly lower (higher) 15 cm;

The step size is less (more) 70-80 cm;

The leg crosses behind the leg;

The forward movement of the arms is carried out significantly below (above) the set height, and when moving backwards, it is not to the point of failure in the shoulder joint.

When learning to move in formation steps, it is necessary to ensure that the soldiers do not sway from side to side when moving. The reason for the swaying is the incorrect positioning of the legs when moving: instead of placing the legs internal part feet along the axis of movement, place them to the sides, while the center of gravity of the body shifts to the right and then to the left with each step.

If a soldier seems to jump while moving at a marching pace, he must be pointed out to his mistake and demand that he transfer the weight of his body from foot to foot evenly, and not in jerks. When moving, you should not allow one leg to cross over the other.

Turns while moving. Commands given when making turns

Turns in motion are performed according to the commands: “Direct-VO”, “Nale-VO”, “Round - MARCH”.

Turn right in traffic

Turn left in traffic

Learning to turn while moving to the right in three-count divisions

To perform a turn while moving to the right in divisions, the command is given in three counts: “Turn while moving to the right, in divisions; do it ONCE, do it TWO, do it THREE.”

According to the “do - ONCE” count, take a marching step with your left foot forward, swinging your arms in time with the step, and stop in a position with your arms down.

In the “do - TWO” count, turn sharply to the right on the toe of your left foot, simultaneously with the turn, move your right foot forward and take a step in a new direction.

Training to turn while moving to the right in four-count divisions

To train a turn while moving to the right in divisions of four counts with movement three steps forward, the command is given: “Turn while moving to the right by four counts, in steps - MARCH” and the count is made: “one, two, three. FOUR".

Counting “one, two, three,” take three marching steps forward along the line of the square.

To the loud count of “FOUR”, turn right and take a step.

Repeat the exercise for the next count of “one, two, three, FOUR.”

Learning to turn while moving left in three-count divisions

To perform a turn while moving left in divisions, the command is given in three counts: “Turn while moving left, in divisions; do it ONCE, do it TWO, do it THREE.”

According to the “do - ONCE” count, take a marching step with your left foot forward, and then with your right, swinging your arms in time with the step, and stop in a position with your arms down.

In the “do - TWO” count, turn sharply to the left on the toe of your right foot, simultaneously with the turn, move your left foot forward and take a step in a new direction.

For the count of “do - THREE”, place your left foot.

For the next count of “do - ONE”, “do - TWO”, “do - THREE”, repeat the technique from the beginning.

Training to turn while moving left in four-count divisions

To train a turn in motion to the left in divisions of four counts with movement four steps forward, the command is given: “Turn in motion to the left in four counts, in steps - MARCH” and then the count is “ONE, two, three, four.”

To the count of “One, two, three, four,” take four marching steps.

Under the next loud count of “ONE”, make a turn and step.

At the count of “two, three, four” they continue moving.

Under the next count “ONE, two, three, four,” the exercise is repeated.

Learning to turn while moving in a circle in four-count divisions

To perform a turn while moving in a circle in divisions, the command is given in four counts: “Turn while moving in a circle, in divisions; do it ONE, do it TWO, do it THREE, do it FOUR.”

According to the “do - ONCE” count, take a marching step with your left foot forward, swinging your arms in time with the step.

In the “do - TWO” count, move your right foot half a step forward and slightly to the left, moving your arms in time with your step. Simultaneously with placing the toe of your right foot on the ground, move your body slightly forward and, on the toes of both feet, sharply turn in a circle over your left shoulder.

On the count of “do - THREE”, move your left leg forward to a height of 15-20 cm and fix the position in which the right hand is above the waist belt buckle by the width of the palm and at the same distance from the body, the left hand is pulled back to failure.

On the count of “do - FOUR”, energetically place your right foot next to your left foot and take a combat stance.

Training to turn while moving in a circle in four-count divisions

To train a turn in a circle in four-count divisions, the command is given: “Turn in a circle in a four-count, step - MARCH” and then count “one, TWO, three, four.”

On the count of “one”, take a marching step with your left foot forward, swinging your arms in time with the step.

In the count “TWO,” move your right foot half a step forward and slightly to the left, moving your arms in time with your step. Simultaneously with placing the toe of your right foot on the ground, move your body slightly forward and, on the toes of both feet, sharply turn in a circle over your left shoulder.

On the count of “three”, bring your left leg forward to a height of 15-20 cm, while the right hand should be above the waist belt buckle by the width of the palm and at the same distance from the body, the left hand should be pulled back to failure.

On the count of four, take a step with your right foot.

For the next count of “one, TWO, three, four,” the exercise is repeated.

Typical mistakes when making turns while moving:

The turn in motion was not made in a timely manner;

A turn to the right (left), half a turn to the right (left) is not made on the toe of the left (right) foot;

The turn in a circle is not made on the toes of both feet;

The movement of the arms when turning is not done in time with the step.

To successfully master the basic principles Drill regulations and skillful actions in various formations, it is necessary, first of all, to know all the elements of the formation, the order of execution of commands, and the responsibilities of soldiers before the formation and in the formation.

Drill training for military personnel should begin with studying the requirements of Art. 25 and 26 of the Military Regulations, which a serviceman must know by heart and always clearly and accurately follow.

Formation, movement, change of direction and other actions of units and units of branches of the Armed Forces, branches of troops and special troops on foot without equipment, they are carried out according to commands, orders and instructions. Therefore, the commander must begin studying drill training by explaining to military personnel that formation control is carried out by commands and orders, which are given by the commander by voice, signals, and also transmitted using technical and mobile means.

Commands and orders can be transmitted along the column through unit commanders and designated observers.

Teams are divided into preliminary and executive, but there can be only executive teams.

The preliminary command is given clearly, loudly and drawlingly, so that those in the ranks understand what actions the commander requires of them.

At any preliminary command, servicemen who are in and out of formation on the spot take the position “at attention”, and when moving, they place their feet more firmly.

The executive command is given after a pause loudly, abruptly and clearly. When an executive command is given, it is carried out immediately and accurately.

To attract the attention of an individual serviceman or unit in a preliminary command, if necessary, the rank and surname of the serviceman or the name of the unit is called, for example:

"Platoon - STOP"; “Second section, step - MARCH”; “Private Ivanov, cru-GOM”, etc.

In conclusion, the commander explains that to cancel a technique (action) or to stop it, the command “Remove” is given; tells and shows that this command takes the position in which the trainees were before performing the technique.

Combat crew.

When forming national teams, they are drilled into units.

The formation calculation consists of calculating military personnel into units (battalions, companies, platoons and squads) and determining the place of each serviceman in the ranks.

To count for battalions, companies and platoons, officers and sergeants line up separately. Soldiers line up in two ranks and count for battalions. The required number of officers and sergeants is assigned to each battalion. After this, the battalions are separated into intervals (distances) that allow calculation within battalions into companies and platoons, as well as calculation within companies and platoons.

Calculation is carried out by the command “In order - CALCULATE” With this command, calculation begins from the right flank: everyone calls his number, quickly turning his head to the one standing to his left, and quickly puts it straight; the left flanker does not turn his head.

The formation of platoons is carried out in the following order: squad leaders line up in one line in front of the middle of the formation, facing it. The rest of the platoon is aligned, and the calculation is made according to the general numbering, as indicated above, after which the platoon commander makes the calculation by squad, naming, for example, the fifth row - the left flank of the first squad, the tenth row - the left flank of the second squad, the fifteenth row - the left flank third squad, etc. The left-flank military personnel of the first ranks in the squads, when naming the squads, extend their hand forward. Then, on the command “First and second squads to the right - VO, the first - ten, second - five steps forward, step - MARCH”, “Nale-VO”. So, at the command of the platoon commander, the squad takes the specified interval (distance).

At the command of the platoon commander, “Squad leaders, GET IN FORMATION,” the designated squad leaders stand on the right flanks of their squads and turn in a circle. Then the platoon is calculated in sections one and two. Squad commanders are not included in the calculation.

At the first drill lesson, it is necessary to show the elements of the formation, give statutory definitions, talk about the purpose of the elements of the formation and the main commands for controlling the formation.

Formation is the placement of military personnel, units and units established by the Charter for their joint actions on foot and in vehicles (Fig. 1).

A line is a line in which military personnel are placed one next to the other on the same line.

Pointing to the formation, the commander says: “The formation in which you are now standing is a deployed single-rank formation,” after which he explains, shows and gives definitions: the flank and front of the formation, the rear side of the formation, the interval and width of the formation.

Flank - the right (left) end of the formation. When the formation rotates, the names of the flanks do not change.

Front - the side of the formation in which the military personnel face (vehicles - with the frontal part).

Backside formation - the side opposite to the front.

Interval - the distance along the front between military personnel (vehicles), units and units.

The commander must emphasize that in the closed formation in which the soldiers are now located, the interval between the elbows of those standing next to them should be equal to the width of the palm.

Distance - the distance in depth between military personnel (vehicles), units and units.

The width of the formation is the distance between the flanks.

After explaining and demonstrating the elements of a single-rank formation, the commander arranges the squad into a two-rank formation and gives its definition.

Incomplete row

First line

Complete series

Second rank

Fig.2 Two-rank system

Two-rank formation (Fig. 2) - military personnel of one rank are located at the back of the head of military personnel of the other rank at a distance of one step (an outstretched arm, palm folded on the shoulder of the soldier in front).

The commander suggests checking the distance between the ranks, for which the trainees of the second rank, extending their (left) arm, place their palm on the shoulder of the person in front.

In a two-rank formation, the ranks are called first and second. When the formation is rotated, their name does not change.

Row - two military personnel standing in a two-rank formation behind each other's heads. If the soldier in the first rank is not standing behind the head of the soldier in the second rank, such a row is called incomplete; the last row should always be complete.

When turning a two-rank formation in a circle, servicemen in an incomplete row move into the line in front.

Four people or less are always lined up in one line. To show an open formation, the commander opens the two-rank formation and explains that in an open formation, trainees in ranks are located along the front from one another at intervals of one step or at intervals specified by the commander.

Then the commander poses questions to the trainees, checking how they have mastered the material covered. If the trainees have mastered the positions of the deployed formation and its elements, the commander begins training.

During the training, having made sure that the practiced positions have been mastered, the commander begins to demonstrate and explain marching formation.

Marching formation (Fig. 3) - a unit is built in a column or units in columns are built one after another at distances established by the Charter or order of the commander.

The commander, having lined up the trainees in a column, explains that a column is a formation in which the military personnel are located behind each other’s heads. Columns can be one, two, three, four or more. Columns are used to build units and units in marching or deployed formation. The commander indicates that a squad is formed into a column of one, two at a time, a platoon of one, two, three at a time, and a platoon of four sections into a column of four.

Locking guide

Building depth

Rice. 3. Build - a column of two.

When naming the elements of a marching formation, the commander gives their definition.

The guide is a serviceman (unit, vehicle) moving as the head in the indicated direction. The rest of the military personnel (units, vehicles) coordinate their movement according to the guide.

The trailing one is the soldier (unit, vehicle) moving last in the column.

The depth of the formation is the distance from the first line (the soldier in front) to the last line (the soldier behind), and when operating on vehicles, the distance from the first line of vehicles (the vehicle in front) to the last line of vehicles (the vehicle behind).

For clarity, when showing the elements of a formation, it is advisable to build one of the squads in front of the platoon (company) formation and show all the elements of the formation on it.

After demonstrating marching formations and their elements, the commander checks mastery by asking Control questions. Having made sure that the trainees have mastered this section, the commander proceeds to study the section “Commands and the order of their issuance.”

Combat stand.

To train soldiers in the drill stance, the squad (platoon) commander forms the squad (platoon) in one line and, coming out in front of the middle of the formation, shows how to take the drill stance.

Starting the lesson, the commander introduces the military personnel to the elements of the drill by demonstrating it in an exemplary manner. In this case, soldiers must see the commander when shown from the front and side. Then the squad leader tells and shows in what cases the drill stance is used, and pays special attention to the correct adoption of the drill stance when giving, receiving orders, and when servicemen address each other. Having finished the demonstration, the commander opens the compartment and allows the soldiers to take the position of a combat stance, while he checks each trainee, ensuring that the mistakes he made are corrected. Then the commander begins to learn the drill position by element.

If the majority of the squad's soldiers make mistakes, the commander begins a practical study of the technique through preparatory exercises. To do this, the soldiers of the squad in an open single-rank formation stand on the line of the construction site. The squad leader demonstrates the first preparatory exercise - “Deployment of socks along the front line to the width of the foot.” He gives the soldiers the opportunity to complete this preparatory exercise for two to three minutes, while he himself monitors the position of the toes of his boots. After this, the commander begins training.

This preparatory exercise is carried out using the command “Put your socks together, do ONE, spread your socks, do TWO, bring your socks together, do ONE”, etc.

When giving commands, the squad leader monitors the width of the socks and points out mistakes made by the trainees. First, the exercise is performed several times under the general command, then the squad leader checks the execution of the exercise by each soldier. After this, he orders to begin independent training once again. You need to perform the exercise several times and only after that check whether the toes have deviated from the line. During independent training, the squad leader and platoon commander check each trainee in turn and ensure that the mistakes they have made are eliminated.

After a single training, the squad leader can move on to pair training, for which he makes calculations in the squad for the first and second and commands: “The first numbers are to the left, and the second are to the right,” then “The first numbers are checked, the second ones are performed - to the pair training - START”, and he monitors the training, corrects mistakes made by the trainees, and periodically changes trainees and supervisors.

Then the squad leader shows the second preparatory exercise - raising the chest with the body moving slightly forward, tucking the stomach, unfolding the shoulders and lowering the arms in the middle of the thighs. This exercise is practiced in the same sequence as the previous one. The commander explains to the soldiers that, starting this exercise, it is necessary to take a deep breath and hold the chest in this position, exhale and continue breathing with the chest raised. Having raised the chest, the body should be slightly forward, tuck the stomach, and turn the shoulders. At the same time, the arms are lowered so that the hands, palms facing inward, are on the sides and in the middle of the thighs, and the fingers are bent and touch the thighs. To check the correctness of the body moving slightly forward, you need to rise on your toes (Fig. 4, o), and then, without changing the tilt of the body, lower yourself onto your entire foot (Fig. 4, b).

Rice. 4. Study of the combat stance by elements:

a - checking the correct position of the body; b - position of the body at a combat stand; c - the difference between the front position and the “at ease” position.

This preparatory exercise is learned by following the command “Raise your chest, pick up your stomach, turn your shoulders, move your body forward, do it - ONCE, take the original position, do it - TWICE.” The exercise is performed until each trainee in the squad (crew, crew) feels the difference in the position of the body with the correct combat stance from the position in a free state.

To show the difference between these positions, you need to use a mirror or place one line opposite the other, and then give the command “First numbers - stand at ease, second numbers - raise your chest.” The same command is repeated for the first numbers, and the second numbers are in the “free” position. Having done this exercise several times, military personnel will clearly see the difference between the position of the front line and the “at ease” position (Fig. 4, c).

When practicing the second preparatory exercise, the squad leader shows how the trainees should hold their heads in a combat stance. To check the correct position of the head, you need to take a combat stance and, without lowering your head, look down in front of you. With the correct position of the head, the soldier should see the closest point on the parade ground, two or three steps away from himself; any other position of the trainee’s head will be incorrect. The commander draws the soldiers' attention to the fact that with the correct combat stance, the chest is always slightly in front of the chin.

Having completed the preparatory exercises, the squad commander (crew, crew) begins training all elements of the formation stance as a whole, for which he gives the commands “STAND UP”, “Attention” or other commands, for example: “Two steps forward (backward), step - MARCH" , “Private Petrov. Step forward, step - MARCH”, etc.

To check the correct execution of the drill stance, it is necessary to order the soldiers to rise on their toes during training. If the formation stance was taken correctly, then all the soldiers in the squad will easily carry out the command without bending forward. You can check the correctness of the drill stance by raising your toes. The commander gives the command “Raise your socks, do it - ONCE.” Those who have taken the correct drill stance will not be able to lift their socks.

Having taught how to take a drill stance in divisions, the commander trains the soldiers in performing the technique as a whole, for which he gives commands, for example: “Squad, in one line - STAND” or “Squad - ATMOUSLY.” The trainees carry out commands, take a drill stance, and the commander monitors their actions and seeks to eliminate the mistakes they have made.

After the trainees learn to take a drill stance, the commander teaches them to carry out the commands “At ease” and “Refuel”. Before the command “Refuel”, you must always give the command “Free”.

At the command “At ease”, you should stand freely, loosen your right or left leg at the knee, but do not move from your place, do not lose your attention and do not talk.

On the command “Refuel”, you are allowed, without leaving your place in the ranks and standing freely, to adjust your weapons, uniforms and equipment, and talk quietly.

If you need to go out of order, you must obtain permission from your immediate superior; Smoking is allowed only with the permission of the senior commander.

Having finished showing and explaining how these commands are executed, the commander begins training. For this purpose, he makes various formations, issuing commands, for example: “Squad - DISCOVER”, “Squad, in one line - STAND”, “FREELY”, “REFUEL”, etc.

At the command “Stand,” the trainees take their place in the formation, take a formation stance, and the commander passes in front of the formation and checks its implementation. Having made sure that the trainees have taken the drill position correctly, he gives the command “FREE” and monitors how it is carried out.

Having made comments to those who incorrectly executed the command “At ease”, and having given it several times for training, he teaches them to perform the command “Refuel”. Thus, by repeatedly giving the commands “STAND UP”, “FREE”, “REFUEL”, the commander ensures that they are carried out correctly and accurately. In the future, skills in performing a drill stance and actions on the commands “At ease” and “Refuel” are improved in all classes.

At the end of the lesson, unit commanders must evaluate each soldier for performing a drill. For this purpose, the squad leader checks and evaluates the correctness of each soldier's formation.

When training cadets, after practicing the drill, it is necessary to give them practice in training subordinates. Mistakes by cadet leaders in the methodology of conducting classes and incorrect interpretation of the Drill Regulations must be immediately corrected by showing them the correct techniques and actions.

Turns in place.

The squad leader explains that turns on the spot are performed by single servicemen during all exercises, when approaching and departing from the commander, as well as when placing units in formation, both during exercises and during formations and movements.

Learning to turn on the spot begins after practicing the drill stance, since only on its basis can these techniques be correctly mastered. In this case, first you need to practice turns to the right, left (1/4 circle) and around (1/2 circle), and then turns half a turn to the right and half a turn to the left (3/8 of a circle).

To teach turns on the spot, the commander lines up the squad along the perimeter of the construction site (in one line with an interval of four steps) and, going to the middle of the formation, demonstrates the turn as a whole at the prescribed pace.

Demonstrating the technique by divisions, he explains that a turn around and to the left is made towards the left hand on the left heel and right toe, and a turn to the right - towards the right hand on the right heel and left toe. All turns are performed on two counts. On the first count, you need to turn around, maintaining the correct position of the body, and, without bending your knees, transfer the weight of the body to the front leg; on the second count, put the other leg in the shortest way.

For a clear and beautiful turn on the spot, it is necessary to transfer the weight of the body to the leg in the direction of which the turn is being made, while simultaneously jerking the body in the direction of the turn and strong emphasis on the toe of the opposite leg, maintaining a stable position of the body. After this, the commander demonstrates the technique at a slow pace while simultaneously explaining the procedure for preliminary and executive commands. Turning to the right is learned in two-count divisions.

Having demonstrated the technique according to divisions, the squad leader commands: “To the right, according to divisions, do - ONCE, do - TWO.”

The squad leader ensures that the trainees, on the first count, sharply turn towards the right hand on the right heel and on the left toe, maintain the position of the body, as in a drill stance, and do not bend their legs at the knees, transferring the weight of the body to the leg in front ( Fig. 5, a). The heel of the back foot and the toe of the front foot should be turned out so that after the end of the turn, the toes are turned out to the width of the foot. The position of the hands should be, as in the combat stance.

If an element is performed incorrectly or unclearly on a count of “one”, the command “RESET” is given.

According to the “do - TWO” count, place your left leg in the shortest way without bending it at the knee.

Having learned with the squad how to turn right by division, the commander begins to learn it as a whole. To do this, he gives the command “Direct-VO” and accompanies it by counting out loud: “ONE, TWO.”

Rice. 5. Position of the legs when turning: a - to the right; b - to the left, c - around.

The study of the technique can be continued while the students themselves count out loud or to the drum.

When studying a turn, you need to pay attention to the fact that it is performed not only with the help of the legs, but also with the help of a sharp movement of the body in the direction of the turn, in compliance with all the rules of the combat stance.

Having completed training in making a right turn, the squad leader first shows as a whole, and then in sections, a left turn. A left turn is also performed on two counts.

At the command “To the left, in divisions, do-ONCE,” students must turn on the left heel and on the right toe, transfer the weight of the body to the left leg, maintaining the correct position of the body, without bending their knees and without swinging their arms during the turn (Fig. 5 B). According to the “do - TWO” count, the right foot must be placed in the shortest way to the left so that the heels are together and the toes are turned out to the width of the foot.

After demonstrating and explaining a left turn, training in performing this turn is carried out in the same sequence.

Having studied the left turn with the squad, the squad leader proceeds to study the circle turn. It shows the technique as a whole, then in divisions into two counts. Further, the squad leader explains that a turn in a circle is performed on the command “Cru-GOM” in the same way as a turn to the left, with the only difference being that the body is turned 180° (Fig. 5, c).

At the command “Around, in divisions, do it - ONCE,” you need to turn sharply on your left heel and on your right toe, without bending your knees, transfer the weight of your body to the heel of your left foot, moving your body a little forward. When turning in a circle, waving your arms around the body is also not allowed. According to the “do - TWO” count, you need to put your right foot next to your left in the shortest possible way so that the heels are together and the toes are turned out to the width of the foot.

Having achieved the correct execution of the technique in divisions, you should move on to training students in performing a circle turn as a whole.

When learning to turn in a circle, the squad leader must carefully ensure that the soldier does not prematurely remove his standing leg from his place, and when turning, does not allow the body to sway or swing his arms.

Training in turns to the right, left, and around is carried out independently, in pairs and as part of a squad until complete mastery.

If a soldier performs a turn or element of a turn incorrectly, the squad leader issues the command “RESET,” indicates the error, and issues the command to repeat.

If a soldier repeats a mistake, the squad leader incapacitates him, shows him the mistake, gives commands, trains him, eliminating all incorrect actions in the process of executing the command.

Those who are in the ranks at this time carry out the reception according to the commands of the commander together with the trainee. At the end of the training of the soldier who made the mistake, the squad leader orders him to get into formation and calls the next soldier out of formation for training.

When performing turns on the spot, the following errors are typical: premature turning of the body at a preliminary command, bending the legs at the knees, waving the arms when turning, tilting the head down, lowering the chest or protruding the abdomen, tilting the body back, turning not on the heel, but on the entire foot, when turning in a circle, there is an incomplete turn, the foot is not placed in the shortest path, and at the same time the body is swaying.

During training, the commander improves his drill skills, so when he gives commands to the personnel, he himself performs the techniques in an exemplary manner.

During classes with cadets of educational units (schools), in order to develop their command and methodological skills, it is advisable to alternately place them in the role of a teacher.

Movement at a marching pace.

The drill step is one of the most complex and difficult to master drill techniques, the implementation of which requires special composure, smartness, clarity, and coordinated movement of the arms and legs from the trainees.

The drill step is used when units are passing through a ceremonial march, when they salute while moving, when a serviceman approaches and departs from his superior, when leaving the ranks and returning to ranks, as well as during drills.

The recommended sequence for learning to move in marching steps is as follows:

Hand movement training;

Training in marking a step on the spot;

Training in movement in marching steps in four counts;

Training in movement with a marching step on two counts;

Training in movement at a marching pace at a slow pace (at a speed of 50-60 steps per minute);

Rice. 6. Showing the position of the hands when moving in a marching step.

Training in movement at a drill pace at a prescribed pace according to the markings of the construction site;

General training in marching along the parade ground without markings;

Acceptance of tests.

Having demonstrated the movement in a marching step as a whole, the squad leader demonstrates in sections the first preparatory exercise - movement of the arms (Fig. 6), and then gives the command “Movement with the arms, do - ONCE, do - TWO.” According to the “do-ONCE” count, soldiers must bend their right arm at the elbow, moving it from the shoulder near the body so that the hand rises a palm’s width above the belt buckle and is at a palm’s distance from the body; At the same time, move your left arm back until the shoulder joint goes to failure. The fingers should be bent and the elbow of the right hand should be slightly raised. According to the “do - TWO” count, students must move their left hand forward, and their right, starting from the shoulder, back to failure.

After each count, the commander delays the position of the students’ hands and corrects the mistakes they made. If the technique is performed incorrectly by the majority of the soldiers in the squad, he gives the command “LEAVE”, and if only one soldier makes mistakes, he gives the command, for example, “Private Ivanov - LEAVE”.

After learning the preparatory exercise for the hands in divisions according to the commands of the commander, you can move on to training at the expense of the soldiers themselves or to the drum. To complicate this exercise, the designation of a step in place is subsequently added to it (Fig. 7).

The designation of a step on the spot is made using the command “On the spot, step - MARCH.” At this command, the soldiers raise their leg 15 - 20 cm from the ground and place it on the ground with the entire foot.

Rice. 7. Learning hand movements while simultaneously marking a step on the spot.

To practice the preparatory exercise for hands with a step in place, the squad leader gives the command “Movement with hands with a step in place, do it ONCE, do it TWO.” During the training period, special attention is paid to the correct movement and position of the hands.

After mastering the correct position of the hands when walking on the spot, the squad leader begins to study the next preparatory exercise - moving in a formation step in divisions of four and two counts.

Having demonstrated the preparatory exercise in four-count divisions, the commander opens the compartment into four steps and, turning it to the right, commands: “Formation step, in four-count divisions, step - MARCH.” After the command, “March” counts: “ONE, two, three, four; ONE, two, three, four,” etc. The count of “one” is pronounced loudly.

At the preliminary command “Step”, the soldiers of the squad move their body slightly forward, transferring the weight of the body more to the right leg and maintaining stability (Fig. 8, a). According to the executive command “March” and the count “one”, they begin to move from the left leg, in full step, bringing the leg forward with the toe pulled out (with the foot parallel to the ground) to a height of 15-20 cm from the ground (Fig. 8, b) , and place it firmly on the entire foot, at the same time lifting the right leg off the ground and pulling it half a step forward to the heel of the left leg (Fig. 8, b). Simultaneously with the step, the trainees move their right hand forward and their left hand back to failure (as indicated in the first preparatory exercise) and stand on their left leg with their arms down, the right leg straight, with the toe almost at the ground. According to the count of “two, three, four” they make a pause, eliminating the mistakes made at this time.

On the next count of “one,” the movement is repeated with the right foot, and on the count of “two, three, four,” hold again, etc.

After practicing the preparatory exercise for four counts, the squad leader repeats the same movement for two counts, for which he gives the command “Formation step, in divisions into two counts, step - MARCH” and counts: “one, two; one, two”, etc. On the count of “one” a step forward is taken, and on the count of “two” - a pause.

Rice. 8. Movement in marching steps:

a - position before the start of movement; b - beginning of movement (first step); c - position at the end of the first step.

If the squad soldiers make mistakes, the exercise should be repeated again for four counts. Then the squad leader begins to teach movement at a marching pace at a pace of 50-60 steps per minute, followed by an increase in the pace of movement to 110-120 steps per minute. To correct mistakes, it is recommended to move from the full tempo of movement in a marching step to movement in divisions of four or two counts. During the training of the department in performing the technique as a whole, it is necessary to strictly maintain a movement pace of 110-120 steps per minute.

The squad leader, being in the middle of the construction site, gives the necessary commands. If he notices a general mistake, he stops the squad, turns it to the left and, showing how to do it, continues the training. If only one soldier makes a serious mistake, the squad leader takes him a step to the side, stands next to him and corrects the mistake as he goes.

Training in divisions and in general can be carried out by command and at the expense of the commander, independently at the expense of the trainees, and also to the drum.

When learning to move in formation steps, it is necessary to ensure that the soldiers do not sway from side to side when moving. The reason for the swaying is the incorrect positioning of the legs when moving: instead of placing the legs with the inside of the foot along the axis of movement, they place them to the sides, while the center of gravity of the body shifts to the right and then to the left with each step.

If a soldier seems to jump while moving at a marching pace, he must be pointed out to his mistake and demand that he transfer the weight of his body from foot to foot evenly and not in jerks. When moving, you should not allow one leg to cross over the other.

Subsequently, move on to training movement at a marching pace in the formation of squads (platoon).

Upon completion of marching training, the squad leader accepts credit from each student.

Before studying turns in motion, it is advisable to practice walking and running, changing the speed of movement, and stopping movement.

The normal speed of movement is 110 - 120 steps per minute. The step size is 70-80 cm. The normal running speed is 165-180 steps per minute. The step size is 85-90 cm. The running movement begins with the command “RUN - MARCH”.

When starting to run from a place, the student, upon a preliminary command, must slightly move his body forward, half-bend his arms, move his elbows slightly back, and upon an executive command, begin running with his left leg, making free movements with his hands forward and backward to the rhythm of running.

Learning to run begins with demonstrating and mastering the technique at a slow pace. While demonstrating the running technique, the commander pays attention to the position of the body and the movement of the arms, pushing with the leg, bringing it forward and placing it on the ground. After the demonstration, the trainees, at the command of the commander, run in a column one at a time around the construction site, keeping a distance of four to six steps. The commander, being in the center, observes their running, monitoring the correct execution of individual elements of the running technique, pointing out errors and demanding their elimination.

To move from a step to a run, following a preliminary command, you need to bend your arms halfway, moving your elbows slightly back. The executive command is given by the commander simultaneously with the soldier placing his left foot on the ground. At this command, he takes another step with his right foot and starts running with his left foot at normal speed.

To switch from running to walking, the command “Step - MARCH” is given. The executive command is given simultaneously with placing the right foot on the ground. At this command, you need to take two more steps while running and, placing your left foot on the ground, begin to walk.

If it is necessary to move from walking (running) to walking (running) on the spot, the command “IN PLACE” is given abruptly and clearly. The commander in front of the formation shows a step in place in general and by division with an explanation: a step in place is indicated by raising and lowering the legs; the leg must be raised 15-20 cm from the ground and placed on the ground from the front of the foot along the entire footprint; make movements with your hands in time with your step. After this, he begins training.

Teaching a step on the spot is done in divisions into two counts. “Do it - ONCE” - raise your left leg 15-20 cm from the ground, while making a movement with your right hand so that its hand rises above the belt buckle (waist belt) by the width of the palm and at a distance of the width of the palm from the body; with your left hand - back until the shoulder joint fails. According to the “Do - TWO” count, place your left foot on the ground from the front of the foot to the entire footprint. Lower your arms, hands at the sides and in the middle of your thighs.

By repeating the command, the described positions of the right and left legs (arms) are practiced alternately. In this case, special attention is paid to the position of the hands and compliance with the drill stance. If a student makes mistakes when performing techniques, then training should be continued until the noted deficiencies are eliminated.

The training is carried out according to the command “Step on the spot - MARCH”. When transitioning from a standing step to a walking movement, the command “STRAIGHT” is given simultaneously with placing the left foot on the ground (when stepping in place). At this command, the student takes another step in place and begins moving with a full step with his left foot.

At the command “Run in place - MARCH,” the student runs in place, placing his feet on the front of his feet and moving his arms to the rhythm of running.

At the command “STRAIGHT”, given simultaneously with the placing of the left foot on the ground while running, one must take one more step with the right foot while running in place and, with the next placing of the left foot on the ground, begin to run forward.

Having shown and explained the technique of moving by walking and running, transitioning from walking to running and vice versa, and explaining the requirements of the drill regulations for their implementation, the commander begins to train the learned techniques and actions.

Having made sure that the majority of the trainees have correctly mastered the technique of walking and running, the commander, pointing out the shortcomings to individual trainees, offers to eliminate them during extracurricular time, and he himself begins to explain and demonstrate the implementation of techniques for changing the speed of movement. For this purpose, the commander opens the trainees at an interval of five to six steps for the convenience of training.

To change the speed of movement, the commands are given: “WIDER STEP”, “SHORTER STEP”, “FREQUENT STEP”, “RE-SAME”, “HALF STEP”, “FULL STEP”.

To take a few steps to the side in formation on the spot, a command is given, for example: “Two steps to the right (left), step by step - MARCH"; At the same time, put your foot down after each step. To move forward or backward, a command is given several steps, for example: “Two steps forward (backward), step by step - MARCH." At this command, take two steps forward (back) and put your foot down.

When moving to the right, left and back, there is no movement of the arms.

To stop the movement, commands are given, for example: “Squad - STOP”, “Private Petrov - STOP”.

According to the executive command given simultaneously with placing the right or left foot on the ground, one must take one more step and, placing the foot, take the “at attention” position.

Turns while moving.

Learning to separate turns in motion begins with their commander demonstrating them. After the squad leader demonstrates a right turn in the movement as a whole, the turn is learned in divisions of three counts. The commander commands: “Turn to the right while moving, in divisions: do - ONCE, do - TWO, do - THREE.” According to the “do - ONCE” count, you need to take a marching step with your left foot forward, swinging your arms in time with the step, and stop in a position with your arms down; on the count of “do - TWO”, turn sharply to the right on the toe of your left foot, simultaneously with the turn, move your right foot forward and take a step in a new direction, on the count of “do - THREE”, put your left foot.

For the next count of “do - ONE”, “do - TWO”, “do - THREE”, the technique is repeated from the beginning, etc.

For training, the commander calculates the squad into first and second, places the soldiers opposite each other in eight steps with an interval of four steps, so that each of them is opposite a small square on the internal lines of the construction site. The training is carried out in four counts with a movement of three steps forward at the command “Turn while moving to the right in four counts, with a step - MARCH” and counts: “one, two, three, FOUR.” To the count of “one, two, three,” the soldiers take three marching steps forward along the line of the square, and to the loud count of “FOUR,” they turn to the right and take a step. For the next count of “one, two, three, FOUR,” the exercise is repeated. Soldiers move along a 4X4 square. At first the pace of movement is 60 steps per minute, and then 110 - 120 steps per minute to the drum.

Before practicing a turn to the left, the squad leader emphasizes that it is performed in the same way as a turn while moving to the right, with the only difference being that the turn to the left is made after four steps, and at the next count of “ones” a turn is performed on the toe of the right foot. The executive command is given simultaneously with placing the left foot on the ground.

For training, the commander takes the squad a step back and positions it on the outer line of the rectangle. The turn begins with the command “Turn while moving to the left for four counts, with a step - MARCH” and then is carried out to the count of “ONE, two, three, four”, and under the next loud count of “ONE” the soldiers make a turn and step, to the count of “ two, three, four" continue moving.

Rice. 9. Training in left turns while moving

The training can end at the count of the trainees themselves or to the drum. For better assimilation, it is recommended to conduct training in turning right and left together along the small and large square of the construction site, for which the squad moves with a distance of four steps between the soldiers (Fig. 9).

Before learning to turn in a circle while moving, the squad leader studies the requirements of Art. with the personnel the day before. 40 of the Construction Regulations. Turning in a circle requires particularly careful training and longer training.

The commander draws the soldiers' attention to the fact that a turn in a circle, in contrast to turns to the right, to the left, is performed on the toes of both feet, and the movement after the turn begins with the left foot at the moment when the feet are on the toes. Slipping down on your heels after a turn is not allowed.

Rice. 10. Showing a circle turn in motion:

a - step forward, b - half a step forward and to the left; c - position after turning.

The commander explains that to turn in a circle while moving, the executive command “March” is given simultaneously with placing the right foot on the ground, and then the turn is performed for three counts.

Learning to turn in a circle in motion begins in divisions into four counts with the command “Turn in a circle in motion, in divisions: do - ONE, do - TWO, do - THREE, do - FOUR.”

To turn in a circle on the “do - ONE” count, the soldiers take a step forward with their left foot and remain in this position (Fig. 10, a), on the “do - TWO” count, they take their right leg half a step forward and slightly to the left (Fig. 10 , b) and, sharply turning towards the left hand on the toes of both feet, remain in this position.

On the “do - THREE” count, take a step forward with the left foot (Fig. 10, c), and on the “do - FOUR” count, put the right foot forward. The exercise is repeated in the same sequence in a new direction, first at the commander’s expense, and then independently at the trainees’ expense or to the drum.

When performing a turn in a circle, special attention is paid to the sharpness of the turn, as well as to the movement of the hands in time with the step, i.e. when, according to the “do - TWO” count, the right leg is first taken half a step forward, you should send the left hand forward along with it, and right back. As soon as the right foot lands on the toe, the arms should be lowered. At the moment you begin to turn on the toes of both feet, your hands, moving in time with your step, will be at the bottom. According to the count of “do - THREE”, the right hand begins to move forward, and the left hand begins to move back.

The squad leader carefully ensures that when moving the right leg forward half a step, the arms are not pressed down prematurely. Special attention During training in performing a turn in motion, the squad leader pays attention to coordinating the movements of his hands in time with the step.

Training in performing this technique can be carried out in combination with moving three steps forward at the command “Turn in a circle with moving three steps forward, step - MARCH”, and at the count of “one, two, three” three steps are taken, at the count of “four” - turn around.

At the end of the lesson, the commander trains all soldiers to move in formation steps and make turns at the same time. To do this, he places them on the construction site at a distance of four steps and orders them, on command, to walk through this rectangle within 30 seconds. At the command of the commander “Formation step - MARCH”, the soldiers begin to move, and the commander monitors them and after 30 seconds gives the command “STOP”. With the command “Stop” the soldiers stop, and with the commands “Free” and “Refuel” they see if they have reached the place from which they started moving. This exercise is then repeated to the drum.

Turns and half-turns to the right and left when running are performed according to the same commands as when moving at a walk, turning in one place for two counts and to the beat of running.

A turn in a circle while running is made towards the left hand in one place, for four counts to the beat of running.

To consolidate skills in turns in motion, they should be periodically included in morning exercises. physical exercise when performing it with an orchestra, as well as in special drills and competitions for the best division.

Giving military honor on the spot and on the move.

Charter Internal service The Armed Forces of the USSR obliges all military personnel to salute each other when meeting and overtaking, strictly observing the rules established by the Military Regulations (p. 18).

Giving military honor by military personnel is one of the traditions of our army. It emphasizes the respect of military personnel for each other, disciplines them, and develops the skills of correct behavior in everyday life.

Before practicing the issue of saluting on the spot without a weapon, the squad leader is obliged to study the requirements of Art. with the personnel during independent training hours. 65-68 of the Military Regulations. Training in the rules of giving military honor on the spot should be carried out first without a headdress, and then with a headdress on. The commander first repeats with the trainees the following techniques: “headdresses - remove”, “headdresses - put on”.

Headgear is put on and taken off in formation upon command.

If necessary, single military personnel remove and put on the headdress without a command. The removed headdress is held in the left hand bent at the elbow with the star (cockade) forward (Fig. 11).

Without a weapon or with a weapon in the “behind the back” position, the headdress is removed and put on with the right hand, and with the weapon in the “belt”, “chest” and leg position - with the left.

Rice. 11. Position of the removed headgear:

a - caps, b - caps, c - hats with earflaps.

When removing a headgear with a carabiner in the “shoulder” position, the carabiner is first taken to the leg.

Although the technique of removing a headdress is simple in its implementation, it is advisable to first study it in sections, and then as a whole.

To learn how to perform a technique in divisions, the squad leader gives the command “Remove hats, in divisions: do ONE, do TWO, do THREE.”

According to the "do - ONCE" count, take the headdress with your right hand (a cap by the visor, a cap and a hat with earflaps by top part) in a “do - TWO” count, remove the headdress and lower it to the level of the waist belt slightly to the left, at the same time with your left hand take the cap by the visor, the cap and the cap by the front part near the star (cockade), so that the four fingers of the left hand are outward, and thumb inside the headdress, in the count of “do - THREE”, bend the left arm with the headdress at the elbow and hold it at a right angle with the star (cockade) forward, and lower the right hand at the same time.

Putting on headgear must also be done first in divisions, for which the squad leader gives the command “Put on hats, in divisions: do - ONCE, do - TWO, do - THREE.”

According to the “do - ONCE” count, move your left hand with the headdress forward to the belt and at the same time transfer it to your right hand. In the “do - TWO” count, lower your left hand and put the headdress on your head. On the count of “do - THREE”, sharply lower your right hand down.

Having finished training soldiers in removing and putting on headdresses in divisions, the squad leader begins training in performing techniques as a whole, for which he gives the commands “Hats - REMOVE”, “Hats - PUT ON”.

At the end of the lesson, you can perform a technique as part of a squad, for which the commander gives the command “Squad, headgear - REMOVE” or “Squad, hats - PUT ON”, and so on several times.

Having told and shown the soldiers the rules for saluting on the spot, the squad leader begins to teach them in divisions on two counts with the command “To salute on the spot, the commander from the front (right, left, behind), in divisions: do - ONCE, do -

When the commander approaches, five to six steps along the “do - ONCE” count, the soldiers must take the position of a combat stance, if necessary, turn in his direction, while simultaneously placing their feet, vigorously turn their head with a raised chin towards the commander, look into the commander’s face, turning head after him.

If necessary, the squad leader indicates that the leader passes from left to right (and vice versa). At this command, all soldiers in the squad turn their heads from left to right (and vice versa), and according to the “do - TWO” count, they put their heads straight and take the “free” position. And so the commands are repeated to salute the boss walking with different directions. Having practiced the technique in divisions, the squad commander organizes training in pairs, with soldiers being allocated to pass instead of the commander in front, to the side and behind.

Training in saluting techniques on the spot while wearing a headdress is carried out in divisions in the same order as without a headdress. In this case, the soldiers should first be trained to correctly place their hand on the headgear. To do this, the commander shows and tells that the right hand is applied to the headgear after taking the position “at attention” in the shortest way, and when turning towards the commander, simultaneously with placing the standing leg behind. The squad leader draws the soldiers' attention to the fact that the right hand should have a straight palm, fingers together, the middle finger does not touch the head at the temple, but the lower edge of the headdress (at the visor), the elbow should be in line and at shoulder height (Fig. . 12).

Training in the technique of placing a hand on a headdress begins at the command of the squad leader, “Putting a hand on a headdress and lowering it in sections: do it ONCE, do it TWICE.” On the “do - ONE” count, the soldiers, being in an open single-rank formation, energetically put their right hand to the headdress; on the “do - TWO” count, they energetically lower their right hand down. This exercise can be repeated in front of a mirror, in pairs, independently and under a drum. After learning the division drill, the squad leader trains the soldiers in saluting as a whole. Salute in motion without weapons.

Rice. 12. Putting your hand on your headdress

When moving without weapons, honor is given when meeting each other and when overtaking. The squad leader first demonstrates the implementation of this technique, for which he himself stands in front of the squad line in the role of commander. The squad leader walks past the formation in one direction and the other, saluting. Having shown the technique as a whole, the commander shows it in sections with a brief explanation.

Training soldiers to give military honor while moving while wearing a headdress is carried out in eight counts.

According to the “do - ONCE” count, take a step with your left foot and, with your foot on the ground, turn your head towards the boss, at the same time put your hand on the headdress; lower your left hand down to your thigh. According to the count “do - TWO”, “do - THREE”, “FOUR”, “FIVE”, “SIX”, take steps with your right (left) foot; having passed the boss one or two steps, according to the count “do SEVEN”, at the same time as placing your left foot on the ground, put your head straight, lower your right hand from the headdress down. According to the count of “do - EIGHT”, place your right foot next to your left, and lower your right hand to your thigh.

Having made sure that the trainees have correctly understood the technique, the squad leader lines up the squad in a column one at a time and begins training at the trainees’ count or to the beat of a drum.

In order for soldiers to learn to salute five or six steps before the commander, and after passing him, put their heads straight and continue moving their hands, they should be taught to salute on the count of “do - SEVEN” and “EIGHT”. So, if a soldier begins to salute five steps before his superior, then he will finish saluting at the seventh step. If he begins to salute under his right foot six steps before the boss, he has to take eight steps. Having taught these actions, the commander will avoid mistakes that consist in the fact that soldiers give up their hands when they are near the commander and are not in step with the step.

To test a soldier’s ability to salute while moving, the commander lines up the squad in a column one at a time, gives the command “To salute, distance is 10 steps, step - MARCH” and lets the squad pass by him. The soldiers take turns passing by the commander and saluting him. If a soldier makes a mistake, the commander points it out to him and orders him to repeat the technique. The movement is carried out in both one and the other direction using the construction site.

Having practiced the technique in divisions and as a whole, at the end of the lesson the squad leader lines up the squad in a column one at a time and lets the trainees pass by, giving each person a grade for the technique they practiced.

To learn how to salute while moving without a headdress, the compartment is opened in four steps. Hats are first removed and carefully placed away from the training area.

The squad commander demonstrates the technique of giving military honor when the commander is in place and when the serviceman moves towards the walking commander.

First, the squad leader practices the technique of saluting while moving without a headdress. Having demonstrated the technique in general and by division, the commander explains that in order to salute while moving out of formation without a headdress, five to six steps before the commander (senior), simultaneously with placing your foot on the ground, you must stop moving your arms, turn your head in his direction and, continuing to move, look into his face; Having passed the boss, put your head straight and continue moving your hands.

The squad leader begins studying this technique in divisions of four to six counts. If the boss cooperates, the technique is learned in four counts; if he is in place, the reception is performed for six counts. The technique is learned by the command “Salute in motion, the boss is on the right (left), in divisions: do it ONCE, do it TWO,” etc.

According to the “do - ONCE” count, take a step with your left foot, at the same time as placing it on the ground, stop moving your arms and turn your head towards the boss (Fig. 13). On the count of “two, three, four (five, six),” continue the movement with your hands pressed and your head turned.

For the next count, “do it - ONCE” under your left foot and at the same time as placing your left foot on the ground, place your head straight and continue moving your hands. Then, after taking three free steps, repeat the exercise in the same order with a tempo of movement of 60-70 steps per minute.

Having studied the technique in divisions, the squad leader begins training on command, for example, “Salute in motion, chief on the left, four (six) steps, squad, step - MARCH.” The pace of movement is 110-120 steps per minute.

On the command “March” and on the count of “ones”, the students, having taken a step forward, stop moving their arms and turn their heads to the left while moving. On the count of “two, three, four (five, six)” the soldiers walk at a marching pace, and on the next count of “one”, placing their left foot on the ground, they put their heads straight and walk on the count “two, three, four” at a marching pace. On the next count of “ones,” the salute is repeated, etc. The study of the technique ends with training, which is carried out at the command of the squad leader, at the count of the trainees or to the drum. At the end of the training, the commander lines up the squad in a column one at a time and lets each trainee pass by, checking his actions and eliminating any inaccuracies in the execution of techniques.

Rice. 13. Saluting without headdress.

The training can be carried out with soldiers moving towards one another from a distance of 10 steps between them. In this case, the squad commander can give the military personnel the following recommendation. When moving towards one another, it is necessary to take into account the following: if the military personnel began to salute in five steps, then they will stop saluting after walking only three steps, and if they began to salute in six steps, then four steps.

Typical mistakes made by military personnel when saluting can be the following: along with turning the head, they turn the body; first they turn their head, and then put down (lower) their hand, do not look into the boss’s face and do not turn their head after him.

Saluting when overtaking a boss is practiced on two counts. According to the “do - ONCE” count, you need to take a step forward with your left foot and, at the same time as placing your foot on the ground, turn your head to the left (right) and put your right hand on the headdress, keep your left hand motionless at the hip. According to the “do - TWO” count, take a step and simultaneously with the next placing of your left foot on the ground and overtaking the boss, put your head straight and lower your right hand down. And so the technique is repeated, and the pace gradually increases to 110-120 steps per minute.

After independent training, the technique is repeated to the drum.

When overtaking a boss, honor without a headdress is given as follows: at the first step of overtaking, with your foot on the ground, stop moving your arms, energetically lowering them along the body, and at the same time turn your head with your chin raised towards the boss. On the second step, place your head straight and continue moving your arms in time with the step. When wearing a headdress, simultaneously with turning your head towards the boss, place your right hand on the headdress, and keep your left hand along the body. With your head straight, lower your right arm and continue moving your arms in time with your step.

To learn how to salute without a headdress in four-count divisions, you need to open the formation along the perimeter of the construction site by four steps. On the “do - ONE” count, take a step with your left foot, on the “do - TWO” count with your right foot, at the same time energetically lower your arms along the body and turn your head with your chin raised towards the boss (with the headdress on, simultaneously with turning your head towards the boss, you must apply right hand to the headdress, lower the left along the body and keep motionless). On the count of “do - THREE”, continue moving with your hands in time with the step (with the headgear on, when placing your head straight, lower your right hand and continue moving with both hands in time with the step). On the count of “do - FOUR”, put your right foot to your left, take the position of a drill stand.

After completing training in saluting when overtaking a superior, accept the test from the soldiers.

Breaking ranks, approaching the boss and leaving him.

Approach to the boss It is recommended to learn in divisions into three counts. According to the “do - ONCE” count, take a marching step forward with your left foot, moving your arms in time with the step, and fix the position on your left leg, hands lowered to your hips (Fig. 14, a). In the “do - TWO” count, place your right foot and at the same time place your right hand on the headdress (Fig. 14, b). On the count of “do - THREE”, lower your hand to your thigh. After this, the exercise is repeated. To train these actions, the squad is lined up in one line or in a column, one at a time, with an interval or distance between soldiers of four steps.

Learning how to approach your boss can be done in four counts, moving forward three steps.

On the command “Approach the boss, in four-count divisions, moving three steps forward - start-NAY.” On the count of “one, two, three,” take three marching steps forward; on the count of “four,” place your right foot next to your left and at the same time place your right hand on your headdress. On the next count of “one, two, three”, keep your hand at the headdress, and on the count of “four” lower it. The exercise is repeated several times.

It is recommended to practice leaving the boss in divisions in four counts using the command “Departure from the boss, in divisions in four counts - start-NAI.” According to the “do - ONCE” count, all soldiers in the squad put their right hand to their headgear and answer: “Yes” (Fig. 15, a). According to the “do - TWO” count, they turn in a circle (right, left) (Fig. 15, b) and put their right foot down (Fig. 15, c). According to the count “do - THREE” with the first step (with the left foot placed on the ground, Fig. 15, d), the hand is lowered (Fig. 15, e). According to the “do - FOUR” count, the right foot is placed next to the left (Fig. 15, f). In this sequence, the exercise is repeated at the count of the squad leader, and then at the count of the trainees themselves or to the drum. At the same time, skills in practicing turns around, right and left are improved.

Rice. 14. Approach to the boss: a - stop, b - report.

Rice. 15. Departure from the boss: a - put your hand on the headdress; b - turn around, c - put your foot down, d - step forward, d - lower your arm, f - put your foot down.

When the approach to the boss and the departure from him are learned in sections, these actions are practiced in a complex. The training is carried out in pairs. During training, the squad leader calls the trainees one by one and gets them to take correct and clear actions.

To instill in trainees solid skills in actions when approaching and moving away from a boss, it is recommended to train them at a normal nine-count pace. To do this, the squad lines up in a column, one at a time with a distance of three to four steps, or in pairs, one against the other. At the command of the squad commander, “Approach the chief and move away from him, on nine counts, counting out loud - start-NAY,” the servicemen take three steps forward on the first three counts, starting with the left foot. On the count of “four”, simultaneously with placing the right foot next to the left, the right hand is applied to the headdress. On the count of five, the hand is lowered. On the count of “six,” they again put their hand on the headdress. On the count of “seven”, “eight” they turn in a circle. On the count of “nine,” the right foot is placed next to the left. At this time, the squad leader monitors the actions of the trainees and seeks to eliminate the mistakes they make.

These classes also show the actions of a serviceman when addressing a superior or when a superior addresses him while out of formation.

The squad leader begins training in breaking down on command and returning to formation from a deployed single-rank formation, then from a two-rank formation, and from a column of two, three, or four.

The squad leader sequentially shows the order of withdrawal when a serviceman is in the first rank, in the second rank and in the column. After the demonstration, he explains that a serviceman, having heard his last name, must answer: “I”, and on the command to break out of the ranks, answer: “Yes” - and in a formation step, break ranks for the specified number of steps, counting from the first rank, stop and turn to face the line.

When a serviceman leaves the second rank, he lightly places his left hand on the shoulder of the soldier in front, who takes a step forward and, without placing his right foot, steps to the side, lets the outgoing serviceman pass, then takes his place. When a soldier leaves the line in front, his place is taken by the soldier standing behind him.

From the column in twos and threes (fours), the soldier leaves towards the nearest flank, first turning right (left). If another serviceman is standing nearby, he takes a step with his right (left) foot to the side and, without placing his left (right) foot, steps back, lets the out-of-service soldier pass and takes his place. The exit is made to the middle of the formation by the shortest route with a turn in motion. The number of steps is counted from the first line.

The return of a serviceman to duty is carried out by command, for example, “Private Ivanov. Get in line" or just "Get in line."

At the command of "Private Ivanov" the soldier, facing to the line, having heard his last name, turns to face the boss and answers: “I am,” and on the command “Get in line,” if he is without a weapon or with a weapon in the “behind his back” position, puts

$mob_info$