Cool homemade weapon. How to make a toy wooden gun yourself

All photos from the article

Very often it is necessary to make replicas of weapons or toys for children, and plywood as a material is excellent for these purposes. In this review we will talk about some types of products and figure out how to make them with your own hands. There are simpler and more complex models, but with some perseverance you can master any of the options described below.

What do you need for work?

To make certain products, you must have the required materials and tools on hand. Of course, the list may vary significantly; we will list only the most basic components that are almost always on hand:

Plywood	You can use various waste for work, the main thing is that their size is sufficient for a particular design. It is important to choose the optimal thickness for a particular design; sometimes reliability is very important, especially if the products will be subject to high loads
Tool	First of all, these are cutting devices; you can use both regular hacksaws and power tools. Often it is necessary to make indentations on the surface; chisels and carpenter's knives are used for this. Sanding is done with regular sandpaper; it is better to use options with different grits to achieve the best result.
Protective compounds	Plywood consists of wood, which is best additionally protected from moisture. Also, to make the products more similar to the originals, they are painted black or steel, the main thing is to choose wear-resistant paint that fits well on wood
Glue	In order to fasten and fix individual elements, special compounds are used, this can be either ordinary PVA glue or epoxy resin. For the most durable connections, high-strength modern compositions based on bakelite are used

Important!
It is better to use high-quality plywood rather than materials of the third and fourth grade, as they look worse and have lower strength indicators.

Some types of products and their features

Let us note right away that not all products are legal; plywood brass knuckles are weapons that can cause injury, and you may be held accountable for wearing them. We will only talk about those options that can be done without any restrictions.

Constructors

This option is suitable for those who like to collect 3D models or want to make an unusual and interesting gift to your child.

Let's look at the example of a pistol:

First you need to find all the necessary circuits. As is known, such products consist of many components, therefore it is very important to find a very high-quality drawing that will consist of patterns of all the required elements. The more detailed it is, the better the final result will be;

Next, using carbon paper, you need to transfer the contours of all elements onto the plywood; do this carefully using a pen or a sharp pointer. The lines can be made more distinct with a pencil, it is important to ensure their good visibility;
Cutting is best done using a stationary device., a jigsaw is suitable for rough processing and is inconvenient to work with when cutting out small elements. Try to do everything as carefully as possible;

Important!
To prevent damage to the ends and cracking when sawing, it is best to treat the surface with a mixture of PVA glue and water in a 1:2 ratio.

The easiest way to make notches is this way: first, a hole is drilled equal in size to the width of the groove, after which cutting is done with a jigsaw;
The last step is grinding the ends so that they are smooth and not scratched during assembly.

Models

If you are interested in the question of how to make a pistol from plywood or another type of weapon that will resemble a real one, then this section will help you:

First of all, you need to find the necessary circuits. Moreover, you will need not drawings of weapons made from plywood, but real sketches with exact dimensions and the geometry of each element;

Very often it is necessary to glue several elements together, the instructions for carrying out the work are simple: the pieces are connected with glue and compressed using clamps. The fixation is removed after the composition has completely dried;
Next, you need to give the workpiece the shape of the desired product or part of it.. Rough work is best done with a jigsaw, and if there are holes or openings, the holes are first drilled, and then the recess is given the desired configuration;
Then comes the most difficult and time-consuming part of the process - cutting out various elements and giving the surface a realistic look. To do this, cutters of various configurations are used; it is better to practice on simpler elements so as not to spoil the result of the work and not to redo everything again. As a result, you should get an exact model of the original;
After this, you need to carefully sand the surface to round all planes and give the material ideal smoothness where necessary.. For rough processing, sandpaper M80-M100 is used, for finishing - M180 and finer;

Finally, in order to give maximum believability, you should skillfully color ready-made option . The coloring, as a rule, is the same as the original, so you can buy paints in the desired colors in advance.

Models of bladed weapons can be made in the same way; the same plywood sword will be an excellent addition to a child’s New Year’s costume, and if you make it life-size, it can be used as a training option for those who want to master fencing.

Bows

You can make a bow with your own hands from plywood, and it will be fully functional and you can shoot at targets from it. Of course, it’s unlikely that it will be possible to create a long-range hunting option, but it will please yourself and your children active recreation you can.

The work is done as follows:

For the handle you need to glue two pieces of bakelite plywood 20 mm thick together, the size of the elements should be approximately 60x400 mm to obtain a full-fledged unit;
After gluing with a jigsaw, the part is given the desired shape, the pattern is best found in specialized literature. Next, you need to use a cutter to give the surface such a relief that it is comfortable to hold during use;

Holes are drilled on both sides for M6 bolts, which will secure the arms. They are best made from 16 mm thick plywood; if you have 8 mm sheets, you can glue the two elements together using wood glue;
Pieces of plywood are glued to the ends to make a shelf for the bowstring, after the glue has dried, they are given the desired shape and grooves 3 mm wide and 8-9 mm deep are cut out;

Next, all elements are sanded and coated to protect them from moisture.. The structure is assembled, and a 3.5 mm thick Kevlar sling is purchased for the bowstring from a climbing equipment store. At this point, the question of how to make a bow from plywood can be considered closed.

Butts

If you need to make a stock or, as it is also called, a stock, then plywood can also be a great option.

The works are as follows:

First of all, you need to glue a couple of pieces of the required size to obtain the required thickness, since standard options are not enough;
Next, you need to outline the future profile of the product and carry out rough cutting using a jigsaw;
The next stage is cutting out a niche for the mechanism, here it is important to do everything as accurately as possible so that the system is fastened securely and correctly, any shifts will lead to the fact that you will not be able to use the weapon normally;
Then the surface is given a relief: the bed is rounded, recesses and contours are made, the shape of which can differ significantly. This is meticulous work with a cutter, which takes a lot of time;
When all the modifications are completed, you can sand the surface and apply a protective compound to it. For example, this is how you make a plywood stock with your own hands.

Conclusion

Plywood is an excellent material for making models, dummies, and even full-fledged weapons. It is important to do everything carefully and use high-quality raw materials, and the video in this article will clearly show some of the work described. If you have valuable comments or questions on the topic, then ask them in the comments.

A pistol made of wood... How many childhood memories are there in this combination of words... Memories of how very young boys and girls chased each other, imagining themselves as robbers and those who caught them. The robbers "shoot" from the simplest toys from a simple piece of wood, they became the first pistols, the first toy weapons made with my own hands. This article will discuss how to make a pistol from wood.

Making weapons is not just a children's dream

If in childhood you simply took a piece of wood that was suitable in shape, now you can use special tools and make a toy that is practically no different from a real weapon. If you build the gun correctly, it will even be able to fire. made of wood can please not only boys, but also their fathers.

Let's start production

To make a “weapon” you will need: a piece of rubber drill with a drill no larger than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a gun from wood, it is worth knowing that the design of this product is divided into three elements: solid handles and barrel, pistons and rubber bands.

First of all, you will need to make the barrel and handle of the gun. They need to be cut out of wood, the thickness should be at least 2 cm. You can choose any shape.

The main thing is that you like it and be comfortable. Don’t throw away the rest of the block, you will need it later.

We continue to answer the question of how to make a gun from wood. In the finished trunk, use a drill to make a hole along the entire length. Sand the hole made thoroughly with sandpaper. To do this, you need to roll the paper into a tube and put it on a suitable stick; either a long nail or a knitting needle will do. From the remaining piece of wood you need to make a piston. It looks like a long wooden stick, slightly less than 6 mm in diameter. There should be a slight thickening on one part of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. You need to attach an elastic band to the thickening. It or the tape must be cut from a piece of a bicycle inner tube. Instead of a wooden rod, you can simply take a long nail. His hat will serve as a sear. The nail itself must be cut to the length of the barrel, and the cut area must be sanded well with a file to completely dull it.

The finished piston is placed in the barrel of the pistol, while at the same time it is necessary to pull the rubber band onto the handle of the weapon. The sear will need to be adjusted so that when it is pulled back the trigger is raised. You should also make sure that it can catch on the protrusion on the pistol handle. At the same time, the piston will be firmly fixed in the cocked state. The DIY gun made of wood is ready.

We fire a training salvo

You need to shoot from such a design in this way: take the pistol in your hand, thumb At the same time, the hands push the sear upward, it slides and moves the piston along the barrel. If you don’t know how to make a gun out of wood, then this article should help you achieve excellent results.

This question interests quite a few fathers and grandfathers who have sons and grandchildren, despite the fact that today in children's store chains you can purchase any similar toy, based on the wishes of the child, as well as the financial capabilities of his parents.

How to make a homemade gun from wood

If a question arises, how to make a homemade shooting pistol from wood or not , You can try to show all your imagination and, if you have certain carpentry skills, try to plan it based on a pre-selected suitable wooden blank. It is best to take soft tree species for this; linden or pine will work very well in this case, but if desired, your child’s coveted toy can be cut from other species.

As a basis, you should take a board of the required size and thickness, perhaps use materials that have already been used previously, but for some reason have lost their relevance and significance, for example, part of old furniture or leftovers that were not used in production.

How to make a gun out of wood: drawing

Of course, any craftsman, when creating a wooden figurine, will rely on a pre-made auxiliary drawing. You can try to find such instructions for the manual in old books on carpentry, do-it-yourself magazines, or use advanced technologies, and look at everything that the resources of the World Wide Web - the Internet - offer us. You can also try to make a similar drawing yourself. To work in this case, you will need a sheet of paper, a simple pencil, an eraser (eraser), a ruler, and also, possibly, a compass.

It will be much easier if, as a basis for your future creation, you take a ready-made plastic model of a similar toy, which you will probably find in the house where boys grow up, and simply take the measurements you need from it, down to the millimeter, from all possible sides for constructing a drawing and further work. .

If you have nothing to take measurements from, you can try to draw something yourself. You should not bother with a design that is too complex; firstly, it will take you too much time to create the drawing itself, and secondly, if you do not have a certain amount of knowledge and your arsenal does not have a sufficient number of woodworking tools, your plan may simply not work out general disappointment for you and your boy. Therefore, it is enough to simply repeat the shape of the pistol, which, by the way, even your child can draw for you.

Once the drawing is ready, you can proceed to work. As in the case of sewing, where needlewomen, before cutting the fabric, transfer all the details of the pattern onto it, it is better to first schematically transfer the main shapes of the future wooden toy with a simple pencil onto the selected base material.

Next, armed with the appropriate tools, you should begin making the toy. This will require patience, perseverance and accuracy, as well as time. Gradually, layer by layer, a piece of wooden blank will begin to take on the desired shape in your hands and become more and more like a pistol for children's games.

Instructions from carpentry experts, as well as video tutorials, will help you perform all the manipulations correctly. Which you can probably find on the Internet without any problems. To do this you just need to select one of the search engines, set the phrase there: - “ how to make a gun from wood video", or similar and necessary information will be immediately provided to your attention.

When the product is ready, it is better to sand its entire surface so that the wooden base becomes smooth and does not lead to minor injuries such as punctures, splinters, etc. when playing with this toy. Sandpaper with zero abrasiveness is best suited for these purposes.

To make the finished pistol look even more attractive, it can be coated on top, like others, with several layers of varnish. In this case, it is better to use acrylic-based varnish; it is safe and non-toxic, which is extremely important when making a children's toy. But if you don’t have such an environmentally friendly coating on hand, you can also use the traditional one, which is used specifically for wooden surfaces.

Please note that varnishing the figurine should be done exclusively in a well-ventilated area, or better yet, in the open air, so that harmful fumes from the chemical material do not have a negative impact on the health of you and your child. For the same reasons, you should leave the toy pistol to dry away from living quarters.

The pistol can also be decorated with paints. Here it is advisable to use natural-based dyes - acrylic, gouache or even watercolor. Give your child such pleasure and allow him to choose the color and design of the gun toy. In addition to the fact that such a process will greatly delight your baby, it will also have an extremely beneficial effect on his development. After all, this is how, in a playful form, children’s imagination awakens. Skills are developed in accuracy, perseverance, patience, and the desire to complete the work started. And when working with small details and drawing them, fine motor skills of the fingers are actively involved in the process, which in turn has a positive effect on the mental functioning of the brain.

How to make a gun from wood that shoots bullets

In order to make this version of the toy, you must have certain knowledge, tools and skills. One thing can be said for sure - creating such a toy is extremely difficult and beyond the power of amateur carpenters; here it is necessary to draw up a lot of drawings and do a lot of complex, sometimes even jewelry, work in order to achieve the intended goal. Therefore, it is better to abandon this idea and talk your dreaming child out of it. In addition, such a wooden toy gun can turn out to be very dangerous in the hands of a child, and lead to the most unpredictable consequences, ranging from minor injuries and injuries to serious threats to health.

But if you still want to try your hand, then it will help you figure out how to make a shooting gun out of wood video, following which you can create your own model of wooden weapon. However, it should not end up in the hands of a child; for the reasons described above, such toys for adults are made exclusively for souvenir purposes and are assessed only as thin and professional work masters

Stop there how to make a combat pistol from wood we will not. Since our article is primarily aimed at making interesting toys for children, and not for adults, read below how you can create interesting models quite easily and quickly based on cheap and accessible materials - paper and cardboard. In one of our articles we told you about, today we will share other equally interesting works.

As you can see, you can make toy weapons for little fidgets from a wide variety of materials, from wood to paper. The main thing is that such fun is safe, interesting and does not awaken hatred and aggression in the child. Therefore, it is better to play less with such models, giving preference to something calmer - toy vehicles, outdoor games with sports equipment, or educational logical toys.

How to make a shooting pistol?

It is absolutely possible to make a shooting pistol different ways and from all kinds of materials. A lot depends on the time you are willing to spend on work and on your imagination. It will be easier to follow these instructions if you have an understanding of the pistol's design. You can learn about the main components of a pistol from our article. Below are several ways to make a gun that will shoot rubber bands, paper or bullets.

A gun that shoots rubber bands

Materials

You will need:

3 wooden barbecue skewers or plywood stick 200*10*5 mm;
3 wooden clothespins;
2 plastic clothespins (can be replaced with wooden ones);
stationery erasers;
scissors or knife;
glue gun or wood glue.

Gun manufacturing process

The technology for making a gun that shoots rubber bands is shown in this video.

Pistol that shoots bullets

This original toy can be made within a few minutes, and you can use crumpled paper, plastic balls and even marshmallow pieces as bullets.

Materials

To make such a pistol you will need:

polyvinyl chloride pipe - 55 cm, diameter 2 cm;
2 PVC corners of suitable diameter;
2 PVC tees of suitable diameter;
2 PVC plugs of suitable diameter;
scissors for cutting PVC pipes or a sharp knife;
tape measure or measuring tape;
soldering iron for PVC pipes.

Build process

A special soldering iron is used to solder pipes, but some craftsmen heat the ends of PVC products over an open fire and then connect them. Minus last method The point is that, if not calculated correctly and overheated, the edge of the pipe will melt, and this can reduce the internal diameter of the workpiece. Therefore, it is better to practice a little beforehand.

The gun is ready. The bullet is inserted through the barrel. To fire a shot, grasp the pistol by the handles and blow into the “trigger” hole. The firing range from such a pistol can reach several meters.

Shooting toys can be bought in a store without any problems, but you can successfully make them yourself. On the pages of the website Secret of the Master, various designs of cool toys are considered, from the simplest to the more complex, which, in addition to gaming and experimental purposes, can bring practical benefits, for example, in protecting crops from pests at the dacha.

How to make an office cannon with your own hands

A simple gun design invented to carry out “office wars”. The projectile is a sheet of paper or a light ball crumpled into a ball. The gun does not allow firing in a straight line, but it shoots well with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun can be easily made with your own hands from plastic bottle and stationery erasers. Watch the video for details.

How to make a rubber gun with your own hands

Rubber gun

A simple wooden automatic three-shot pistol. The pistol fits comfortably in the hand. It is cut out of plywood with a hand jigsaw; you only need to cut out 4 parts. The gun fires rubber bands. With such a pistol it is easy to organize a small airsoft game in an apartment or on the street. We look at the drawings of the gun stencil (link at the end of the blog). Load your homemade pistol carefully according to the instructions. For safety reasons, wear safety glasses.

How to make a vortex cannon with your own hands

A wonderful weapon for children's games and experiments. The gun shoots... with air, an invisible toroidal vortex erupts from the barrel, which moves in the direction of the shot for some distance. A safe thing for children to play with weapons and remotely “destruct” toy buildings. Details of the design are shown in the video and.

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on your household, then you have every opportunity to do game console to the compressor. The weapon was adapted to the available ammunition - rowan and pea, and accordingly the machine guns were called rowan launcher and pea shooter. The design of a homemade machine gun is simple. It is based on manual blowing, which makes it easy to control the weapon. For manufacturing details, see the video.

How to make a gas gun with your own hands

When repeating this design, strictly follow the safety rules. You build a gas gun at your own peril and risk and take ALL responsibility for the construction, use, consequences of using this device, as well as for any damage caused. The authors summarized the accumulated experience in building potato cannons and tried to use ready-made elements in the design. In total, three types of guns of different calibers were designed.

Mini gun 32 mm caliber

The gun is made by hand in the shape of a pistol and shoots small balls. A reliable piezo spark source will not create problems. The gun is used for target shooting competitions. Requires some experience when loading. See production details

Gas apple potato gun 50 mm caliber

Gas gun

This is a serious design in terms of sound and projectile. The main application is to imitate the sound of a hunting rifle shot to scare away birds. A reliable budget gun, but only if used correctly and sparingly. Strictly follow safety rules and assembly recommendations. See how to make an Apple Gun

Gas mortar 100 mm caliber

Experimental design for firing volumetric light projectiles with electronic filling. Some results are shown in the video. When repeating, do not forget that this is not a real mortar, but just a thin-walled plastic pipe. Not all planned experiments have been carried out with this gun and will be published as the results are obtained. The record height of the shot is 80 meters. The mortar in its repetition is the simplest design, see the video for details.

The topic of designing guns is not closed and will be continued.

All photos from the article

What do you need for work?

Plywood	You can use various waste for work, the main thing is that their size is sufficient for a particular design. It is important to choose the optimal thickness for a particular design; sometimes reliability is very important, especially if the products will be subject to high loads
Tool	First of all, these are cutting devices; you can use both regular hacksaws and power tools. Often it is necessary to make indentations on the surface; chisels and carpenter's knives are used for this. Sanding is done with regular sandpaper; it is better to use options with different grits to achieve the best result.
Protective compounds	Plywood consists of wood, which is best additionally protected from moisture. Also, to make the products more similar to the originals, they are painted black or steel, the main thing is to choose wear-resistant paint that fits well on wood
Glue	In order to fasten and fix individual elements, special compounds are used, this can be either ordinary PVA glue or epoxy resin. For the most durable connections, high-strength modern compositions based on bakelite are used

Important!
It is better to use high-quality plywood rather than materials of the third and fourth grade, as they look worse and have lower strength indicators.

Some types of products and their features

Constructors

This option is suitable for those who like to collect 3D models or want to make an unusual and interesting gift for their child.

Let's look at the example of a pistol:

First you need to find all the necessary circuits. As you know, such products consist of many components, so it is very important to find a very high-quality drawing that will consist of patterns of all the required elements. The more detailed it is, the better the final result will be;

Next, using carbon paper, you need to transfer the contours of all elements onto the plywood; do this carefully using a pen or a sharp pointer. The lines can be made more distinct with a pencil, it is important to ensure their good visibility;
Cutting is best done using a stationary device., a jigsaw is suitable for rough processing and is inconvenient to work with when cutting out small elements. Try to do everything as carefully as possible;

How to make an office cannon with your own hands

A simple gun design invented to carry out “office wars”. A projectile is a sheet of paper or a light ball crumpled into a ball. The gun does not allow firing in a straight line, but it shoots well with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun can be easily made with your own hands from a plastic bottle and rubber bands. For details, watch the video and.

How to make a rubber gun with your own hands

Rubber gun

How to make a vortex cannon with your own hands

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on your household, then you have every opportunity to make a game console for the compressor. The weapon was adapted to the available ammunition - rowan and pea, and accordingly the machine guns were called rowan launcher and pea launcher. The design of a homemade machine gun is simple. It is based on manual blowing, which makes it easy to control the weapon. For manufacturing details, see the video.

How to make a gas gun with your own hands

Mini gun 32 mm caliber

Gas apple potato gun 50 mm caliber

Gas gun

Sometimes there comes a moment in the relationship between father and child when all the games and entertainment are practically running out. You have to rack your brains to find new forms of leisure in order to captivate your child as much as possible and not let him get bored. In such cases, the Internet or special printed publications come to the rescue, which contain a huge database of games for every taste and taking into account age characteristics.

How to make a gun from wood

One of the proven ways to engage a child can be military sports games, both in the fresh air and within the confines of a house or apartment. Moreover, most interesting game it will be if everything necessary equipment and make your own ammunition.

The key element in this type of game is weapons, and in particular all kinds of pistols and machine guns. You can use weapons purchased in a store, but the most exciting and interesting thing will be to make a pistol from wood with your own hands. This activity can interest the child and contribute to the development of new skills and abilities. At the stage of preparation for the game, the question may arise about how to make a pistol out of wood. You don't need any supernatural abilities to do this. The whole process will not seem overly complicated.

Necessary materials

To do this, you will need some tools and materials that can easily be found at home or in the country: a board made of non-solid wood, a ruler, a pencil or pen, a plane, a hacksaw, a file, a vice or clamps, a wood burning machine, sandpaper and varnish. This will be quite enough to make a homemade pistol made of wood.

Some stages in the process of making a toy can be done by a child. Direct participation in the process of making a pistol will not allow him to get bored.

Another important and desirable point in making homemade weapons is a drawing of a pistol made of wood. You can easily find it on the Internet or draw it yourself, taking into account all the wishes for the future product.

Making a pistol

At the initial stage, you should take an existing board and select an area on it without knots, holes or damage. The optimal thickness of the wood material should be 30-40 mm. It is desirable that the wood is sufficiently dried, which will make it easier to sand at the final stage. Using a hacksaw, you need to cut out the required workpiece and carefully process its surface using a plane and sandpaper. The thickness of the board should be the same throughout its entire thickness.

Drawing selection

Having decided on the model and parameters of the pistol, you need to make a drawing of it or modify the existing one, taking into account all the nuances and wishes. It is possible to use illustrations or photographs of the weapon you like to recreate the smallest details as much as possible. You can turn to specialized forums, where they can tell you how to make a wooden pistol as similar as possible to the original.

The next step will be this: you should transfer the image of the previously made drawing to the existing workpiece, preserving all the parameters and dimensions and taking into account all the smallest details and features of the future pistol. To make it convenient to cut a wooden workpiece, it can be secured in a table vice or using clamps. This will greatly facilitate the process of making a pistol. It is worth cutting out parts not strictly according to the applied contour, but with a little margin for finishing.

Workpiece processing

Using a file, sandpaper and a knife, it is necessary to give the product all the features inherent in a weapon, highlight all the necessary and distinctive design details, and indicate key elements real pistol: trigger, front sight, butt. At the final stage of processing the workpiece, a mock-up should be obtained that exactly resembles a real pistol and corresponds to the image in the drawing. The greater the similarity, the more pleasant it will be to hold such an object in your hands.

The final stage

Using sandpaper of varying degrees of coarseness, remove all unevenness and roughness and sand all sharp corners.

The presence of a grinding machine or machine can speed up the process of final processing of the workpiece. Some details can be highlighted using a wood burning device. At the final stage, to give a more aesthetically pleasing finished look, the toy should be coated with several layers of dark varnish and allowed to dry thoroughly. To add shine and gloss, the product can be polished with wax.

By doing this activity with your child, you will not only promote bonding, but also teach him how to make a gun out of wood. In the process of processing wood material, you can acquire some skills that the child did not possess before. And, without a doubt, it is very nice to have something made with your own hands.

Gun- this is one of the favorite toys of children, but the problem is that most purchased toys break after a very short time. Today, we want to show you how to make a gun with your own hands from wood, which will be very difficult to break. It can be used not only as a toy, but also in martial arts training, because they often teach how to behave with dangerous people, in whose hands a pistol.

How to make a pistol at home?

To make a gun, we will have to work a lot on it, but we need very few materials. We only need a piece of wood, 20x12 centimeters in size, 2.5 centimeters thick, and don’t forget about the layout, which needs to be printed on a sheet of paper. Let's start making our gun!

1. First of all, the model of the pistol needs to be transferred to the tree so that we can then see what needs to be cut and where.

2. When the layout is drawn, we see that the excess parts can be trimmed. Using a jigsaw, cut them off.

3. In our case, we used a jigsaw machine, but you can even use a regular one.

5. After sanding, we clamp the gun into a cleat and use a scroll saw to cut out a hole where the trigger should be.

7. Don’t forget to also give the trigger a final shape; you can use a rasp for this.

8. You can also make notches on the barrel, like those on a real pistol.

9. We can cut out smaller parts with a chisel.

10. Finally, the entire gun needs to be sanded with fine sandpaper and then polished with a zero polish.

$mob_info$